1403Canon PIXMA G3260

Fix Canon PIXMA G3260 Error 1403: Print Head Issues

The Canon PIXMA G3260 is an all-in-one inkjet printer featuring a refillable ink tank system, designed for high-efficiency home and office printing. Error code 1403 typically occurs when the printer fails to communicate with the print head, often caused by dirty electrical contacts or a hardware fault. Addressing this error promptly is critical to prevent permanent damage to the carriage assembly or the logic board. Ignoring this code can lead to complete device failure, preventing even basic printing tasks.

1 views

Common causes

  • 1Contaminated electrical contacts on the print head preventing signal transmission.
  • 2Print head misalignment resulting from vibrations or impact.
  • 3Internal electrical short within the print head unit itself.
  • 4Loose or damaged internal cable connecting the carriage to the main board.

Solutions

Diagnóstico rápido

Error 1403 is characterized by the alarm light flashing and a specific notification on your computer or printer screen. It is distinguished from other errors by the fact that the carriage attempts to move but fails to initialize the print head detection cycle. Check your connection status and ensure the printer is not stuck in a deep error loop.

Solución paso a paso

  1. Power off the printer completely and unplug it from the power source for 5 minutes to clear the hardware state.
  2. Open the scanner unit and the print head cover to gain full access to the print head carriage.
  3. Remove the print heads by unlatching them gently, then inspect the gold contacts for debris or ink splatters.
  4. Clean the contacts using a dry, lint-free cloth. Do not use liquids that could cause electrical shorts.
  5. Reseat the print heads firmly, ensuring they click into place before closing all covers and restarting the device.

Prevención y mantenimiento

Avoid touching the electrical contacts on the print heads, as oils from your skin can create high-resistance points. Use only genuine Canon ink to ensure proper nozzle health. If you print infrequently, perform a nozzle check once every two weeks to keep the ink flowing and prevent the system from drying out.

Cuándo llamar a un técnico

If the error 1403 persists after cleaning and reseating the print heads, it usually indicates a faulty print head or a damaged ribbon cable. At this stage, professional service is required to replace the internal components correctly.

Ficha técnica del equipo

  • Technology: Inkjet with refillable ink tanks.
  • Speed: Up to 10.8 ipm (black) / 6 ipm (color).
  • Connectivity: Wi-Fi, Hi-Speed USB.
  • Input Capacity: 100-sheet rear tray.
  • Compatible Consumables: Canon GI-11 ink bottles (Black, Cyan, Magenta, Yellow).
  • Recommended Use: Home office and high-volume student printing.

Steps to follow

  1. 1

    Power Cycle

    Unplug the printer and wait to discharge internal capacitors.

  2. 2

    Access Carriage

    Lift the top cover to expose the print head carriage assembly.

  3. 3

    Clean Contacts

    Wipe the gold print head contacts with a dry cloth.

  4. 4

    Secure Reseat

    Snap the print heads back in, verifying the locking mechanism.

Frequently asked questions

It is a non-destructive error code, but if left unaddressed, it prevents printing and can lead to frustration or further hardware issues.

Yes, performing a simple cleaning of the print head contacts often resolves this issue.

Always use original Canon GI-11 ink bottles to ensure print head longevity and prevent clogging.

If you use the printer daily, minimal maintenance is needed; however, cleaning the heads through software is recommended monthly.

Fix Canon PIXMA G3260 Error 1403: Print Head Issues | Vimazdev