1401PIXMA Pro-200

Canon PIXMA Pro-200 error 1401: Troubleshooting Guide

The Canon PIXMA Pro-200 error 1401 indicates that the printhead is currently not recognized by the unit. This code often appears after ink replacement or during start-up routines. Why does my printer show error 1401? Usually, this points to dirty gold contacts on the printhead or a loose internal connection.

2 views

Common causes

  • 1Contaminated electrical pins on the printhead assembly.
  • 2Improper installation or alignment of the printhead.
  • 3Failed internal communication on the carriage board.
  • 4Physical wear of the printhead circuitry.

Solutions

Diagnóstico rápido

The 1401 error is clearly signaled by a flashing LED code on the printer body and a specific alert on your computer software. It signifies an communication breakdown between the logic board and the printhead assembly.

Solución paso a paso

  1. Power off the unit and unplug it to move the carriage safely.
  2. Unlock and remove the printhead from the center carriage.
  3. Clean the contacts using a clean, lint-free cloth, avoiding liquid chemicals.
  4. Reinstall firmly until you hear the mechanical click.

Prevención y mantenimiento

Use original ink cartridges to prevent nozzle clogging. Avoid touching contact points with your fingers. Perform regular head alignment checks to ensure optimal hardware health.

Cuándo llamar a un técnico

If the error 1401 persists after careful re-seating and cleaning, the printhead might have reached its end of life or suffered a short circuit.

Ficha técnica del equipo

  • Technology: 8-color professional inkjet photo printer.
  • Speed/output: A3+ photo print in approx. 90 seconds.
  • Connectivity: Wi-Fi, Ethernet, USB 2.0.
  • Feed capacity: Rear tray design.
  • Compatible consumables: CLI-65 ink tank series.
  • Recommended use: Professional photography and fine art printing.
  • Official drivers / firmware

Steps to follow

  1. 1

    Power cycle

    Power off the printer and disconnect the power cord for 10 minutes.

  2. 2

    Printhead inspection

    Open the lid and remove the printhead to clean the electrical contacts.

  3. 3

    Reinstallation

    Reinstall the printhead, ensuring it locks securely into place.

Frequently asked questions

This error means the printhead is not detected correctly or is malfunctioning.

It is a hardware issue preventing printing, but often solved by re-seating the printhead component.

This model uses the 8-color Lucia Pro ink system for professional photo output.

Perform an automatic nozzle check if you notice print artifacts or after 15 days of inactivity.