1401pixma-ip110

Canon PIXMA iP110 Error 1401: Printhead Installation Fix

Canon PIXMA iP110 error 1401 is a diagnostic code indicating that the printhead is either missing or incorrectly installed in the carriage. Users usually see this when they attempt to print and the machine becomes unresponsive. Why is my Canon PIXMA iP110 showing error 1401? This is commonly a mechanical issue related to the printhead's contact with the printer's internal logic.

0 views

Common causes

  • 1Printhead is not fully seated in its housing.
  • 2Dust or ink residue blocking the gold electrical pins.
  • 3Lock lever was not engaged correctly during installation.
  • 4Printhead has suffered a critical electrical failure.

Solutions

Diagnóstico rápido

Error 1401 is typically triggered when the printhead lock lever is not fully engaged or the contacts are obscured. If the printer cannot identify the printhead, it halts operations immediately.

Solución paso a paso

  1. Open Cover: Lift the front cover while the printer is powered on.
  2. Unlock: Raise the blue lock lever to release the printhead.
  3. Inspect: Look for any ink buildup on the metal contacts.
  4. Reseat: Reinsert the printhead, push until it clicks, and lock the lever firmly.

Prevención y mantenimiento

Ensure no dust enters the carriage chamber. Always handle the printhead by its edges and keep the gold contact points clean.

Cuándo llamar a un técnico

If you have properly cleaned and reseated the printhead and the 1401 code persists, the printhead circuitry may be dead, requiring a hardware replacement.

Ficha técnica del equipo

  • Technology: Portable Inkjet.
  • Resolution: Up to 9600 x 2400 dpi.
  • Weight: Approx. 2.0 kg.
  • Connectivity: Wi-Fi.
  • Consumibles: PGI-35 & CLI-36.
  • Recommended Use: Traveling professionals.
  • Drivers / official firmware

Steps to follow

  1. 1

    Access Carriage

    Open the printer cover and wait for the carriage to move to the center.

  2. 2

    Remove Printhead

    Lift the lock lever and remove the printhead safely.

  3. 3

    Inspection

    Inspect the contact pins on the printer and the printhead for dirt or damage.

  4. 4

    Reseat

    Firmly push the printhead back into place and engage the locking lever.

Frequently asked questions

This error means the printer fails to detect the printhead, often because it is not seated properly.

Usually, this is a connection issue. However, ensure the pins are not bent during reinstallation to prevent permanent damage.

It uses PGI-35 and CLI-36 ink tanks. Using genuine cartridges ensures the correct fit in the carriage.

Checking the area for debris every time you change a cartridge prevents most installation-related errors.

Canon PIXMA iP110 Error 1401: Printhead Installation Fix | Vimazdev