1401MAXIFY GX2050

Canon MAXIFY GX2050 error 1401: Printhead Fix

The Canon MAXIFY GX2050 error 1401 occurs when the printhead is not recognized by the printer's logic board. This notification is often linked to dirty electrical contacts or poor component seating. To fix the Canon MAXIFY GX2050 error 1401, you must remove and clean the printhead contacts following the official protocol.

1 views

Common causes

  • 1Dirty or ink-stained printhead contacts.
  • 2Physical misalignment in the carriage.
  • 3Electronic failure of the printhead component.
  • 4Internal power instability.

Solutions

Diagnóstico rápido

If the device shows code 1401, the printhead is failing to communicate. Why does my Canon printer show error 1401? Often due to moisture on pins or dried ink buildup.

Solución paso a paso

  1. Open: Lift the access cover.
  2. Remove: Carefully pull out the specified printhead.
  3. Clean: Gently wipe the gold contacts on the printhead with a clean, dry cloth.
  4. Reinstall: Place it back into the carriage, ensuring it snaps into place.

Prevención y mantenimiento

Run software cleaning cycles monthly. Avoid touching gold contacts to prevent grease transfer. Use original ink to extend printhead life.

Cuándo llamar a un técnico

If the 1401 error persists after cleaning and reinstalling the printhead, the head's internal circuit might be burnt, requiring a full replacement.

Ficha técnica del equipo

  • Technology: MegaTank Inkjet
  • Speed/Performance: 15 ipm (black)
  • Connectivity: Wi-Fi, USB
  • Paper capacity: 250 sheets
  • Consumable: GI-56 ink series bottles
  • Recommended use: Home office and SMBs
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Open

    Lift the scanner unit and inner cover to reach the cartridges.

  2. 2

    Remove

    Carefully remove the printhead showing the 1401 error.

  3. 3

    Clean

    Wipe the electrical contacts with a dry, lint-free cloth.

Frequently asked questions

Error 1401 means the printhead is not detected correctly by the printer.

It can be serious if the electrical contacts are damaged, but usually it's just dirt.

It uses GI-56 series ink bottles for the MegaTank system.

Scheduled cleaning helps prevent blockages and read errors.