Canon PIXMA TS3522 Error 1300: Fix Paper Jams
Error 1300 on the Canon PIXMA TS3522 signifies a paper jam inside the printer's feeding path. This is often caused by improperly loaded paper or small fragments stuck in the rollers. The fix involves safely removing the jammed paper and ensuring the feed path is clear to allow the printer to reset.
Common causes
- 1Paper loaded unevenly in the rear feed tray.
- 2Using paper that is too thick or damaged.
- 3Accumulation of paper fibers on the drive rollers.
- 4Improper storage of paper leading to curled edges.
Solutions
Diagnóstico rápido
The 1300 error occurs when the printer sensors detect an obstruction in the paper feed path. You will hear the internal motor struggling, followed by the 'Alarm' light flashing. Check both the rear tray and the front output area to locate the obstruction.Solución paso a paso
- Power off the printer and unplug the power cord to ensure the print head carriage is not active.
- Remove the paper from the rear tray, pulling gently and evenly.
- Open the ink door and use a flashlight to check the rollers for any torn pieces of paper.
- Clear debris carefully using tweezers if necessary, ensuring you do not touch or damage the internal sensors.
- Close all covers and plug the printer back in; it will perform an automatic initialization cycle.
Prevención y mantenimiento
Do not overload the rear paper tray; adhere to the 60-sheet limit. Periodically clean the feed rollers with a damp cloth to prevent paper slippage, and always fan your paper stack before loading to ensure individual sheets feed properly.Cuándo llamar a un técnico
If you have cleared the path and the error persists, or if you detect that the internal plastic gears or rollers have broken, please contact authorized service for repair, as physical damage to the paper feed mechanism is difficult to DIY.Ficha técnica del equipo
- Technology: FINE Inkjet
- Speed: Up to 7.7 ipm
- Connectivity: Wi-Fi, USB, Canon PRINT App
- Paper Capacity: 60 sheets
- Compatible consumables: Canon PG-275 / CL-276 series
- Recommended use: Domestic
- Official drivers / firmware
Steps to follow
- 1
Power off
Unplug the printer to prevent accidental motor movement.
- 2
Access
Open the access door to check the feed path.
- 3
Extraction
Pull the jammed sheet out slowly to avoid shredding.
- 4
Initialization
Power on the printer to let it re-home the carriage.
Frequently asked questions
Use a flashlight to locate them and use long, plastic tweezers to gently remove them without touching sensitive sensors.
No, pulling too hard can damage the paper feed motor or the delicate rollers inside the printer.
The printer is compatible with the Canon PG-275 and CL-276 cartridge series.
Keep the paper tray free of debris and ensure your paper stacks are aligned correctly with the adjustable guides.