1259SureColor T3170

Fixing Error 1259 on Epson SureColor T3170 Plotter

Error 1259 is a critical warning indicating an incorrect reading from the Epson SureColor T3170 ink monitoring system. This issue stops printing operations to prevent printhead damage due to ink supply errors. Addressing this immediately is vital to ensure optimal printer health.

1 views

Common causes

  • 1Poor contact between the cartridge chip and the carriage sensor.
  • 2Ink levels incorrectly reported by the internal firmware.
  • 3Dust buildup in the cartridge connector area.

Solutions

Cartridge Reseat

  1. Open the front cover of the printer.
  2. Remove the ink cartridges one by one.
  3. Ensure there is no debris on the chip contacts.
  4. Reinsert the cartridges firmly until you hear the locking click.

Power Cycle

  1. Turn off the plotter using the main power button.
  2. Unplug the power cable for at least 60 seconds.
  3. Reconnect the cable and restart the device to refresh the sensors.

Steps to follow

  1. 1

    Safe Shutdown

    Properly turn off the device before handling any internal components.

  2. 2

    Cartridge Inspection

    Remove the cartridges and clean the metal contacts with a lint-free cloth.

  3. 3

    System Reboot

    Turn on the unit and check if the control panel has cleared the error code.

Frequently asked questions

It is not recommended, as the sensor indicates the system cannot verify ink flow, which could lead to permanent printhead damage.

Using non-genuine or refilled cartridges often triggers sensor errors like 1259 due to poor chip data transmission.

If the error persists, a motherboard sensor may require replacement by an authorized technician.