1259PIXMA Pro-200

Canon PIXMA Pro-200 error 1259: Troubleshooting

The Canon PIXMA Pro-200 error 1259 signifies a paper feed mismatch. It is triggered when the printer's sensors determine that the physical media does not match the software configuration sent by the user. Why does my printer show error 1259? This is generally caused by incorrectly positioned paper guides or a mismatch in the print job settings for size and media type.

1 views

Common causes

  • 1Improperly set paper width guides in the rear tray.
  • 2Mismatch between print job settings and loaded media.
  • 3Obstructed paper width sensor due to dust.
  • 4Heavy/fine art paper loaded without correct setting.

Solutions

Diagnóstico rápido

Error 1259 displays a blinking indicator and typically halts the printing process. It's a clear signal to check your input tray and PC print settings.

Solución paso a paso

  1. Adjust the paper guides gently to the edge of the paper stack.
  2. Check your PC print driver settings for paper size and type.
  3. Reload paper ensuring it is aligned to the right-hand side.
  4. Press 'OK' on the device to confirm the load.

Prevención y mantenimiento

Keep your rollers clean with a damp, lint-free cloth. Always fan the paper stack before inserting it to prevent double-feeding or sensor confusion.

Cuándo llamar a un técnico

If the error continues even with perfectly matched settings, the paper size sensor might be obscured by debris and need professional cleaning.

Ficha técnica del equipo

  • Technology: Professional A3+ inkjet photo printer.
  • Speed/output: High-resolution professional prints.
  • Connectivity: USB, Ethernet, Wi-Fi.
  • Feed capacity: Rear-loading tray.
  • Compatible consumables: CLI-65 series.
  • Recommended use: Photo art and professional studio printing.
  • Official drivers / firmware

Steps to follow

  1. 1

    Guide adjustment

    Adjust the paper guides to snugly fit the paper width.

  2. 2

    Retry

    Press 'OK' on the printer control panel to retry paper feed.

  3. 3

    Check size settings

    Ensure computer driver paper settings match the physical paper.

Frequently asked questions

This error occurs due to a mismatch between the paper type/size detected and the print driver settings.

No, it's a configuration issue that requires re-aligning the paper or the settings to proceed.

This model supports various professional photo papers including fine art and glossy media.

Ensure the paper stack is not overfilled and guides are perfectly set.