1203X2670

Lexmark X2670 Error 1203: System Failure

The lexmark x2670 error 1203 refers to a system-wide communication fault. Users often struggle to understand what is error 1203 on lexmark x2670 as it interrupts printing abruptly. Fortunately, most occurrences are resolveable by managing the cartridge contacts properly.

1 views

Common causes

  • 1Dirty electrical pins on the print cartridge.
  • 2Cartridge circuitry failure.
  • 3Intermittent cable connection.
  • 4General logic initialization error.

Solutions

Quick Diagnosis

This error occurs when the internal board cannot communicate with the ink cartridges. It is commonly preceded by power surges or improper cartridge installation.

Step-by-Step Solution

  1. Disconnect the power cord while the unit is active.
  2. Remove the ink cartridges.
  3. Clean the cartridge contacts gently with a dry cloth.
  4. Reinstall and restart the printer.

Prevention and Maintenance

Keep the printer in a clean place. Avoid frequent insertion and removal of cartridges to protect contacts.

When to Call a Technician

If cleaning the contacts does not restore functionality, the internal printer board may require expert diagnostic.

Technical Specifications

  • Technology: Inkjet.
  • Speed: 22 ppm.
  • Consumables: 14, 15, 28, 29.
  • Connectivity: USB 2.0.
  • Recommended Use: Home use.
  • Official Driver Page

Steps to follow

  1. 1

    Hard Reset

    Unplug the device for 60 seconds.

  2. 2

    Clean Contacts

    Gently wipe the gold contacts with a soft dry cloth.

  3. 3

    Reseat Cartridges

    Reinsert cartridges and power back up.

Frequently asked questions

It is a system alert indicating a communication failure between the printer logic and the ink cartridges.

Not necessarily; a hard reset often fixes it.

Series 14, 15, 28, 29.

The printer will not print until the communication is re-established.

Lexmark X2670 Error 1203: System Failure | Vimazdev