1200X2670

Lexmark X2670 error 1200: Solution guide

The Lexmark X2670 error 1200 occurs when the printer fails to communicate with the ink cartridge. Users often ask why does my Lexmark X2670 show error 1200, which is commonly caused by ink residue on the printhead carriage contacts. To resolve this, clean the electrical contacts and ensure the cartridge is properly installed.

1 views

Common causes

  • 1Debris on printhead carriage pins.
  • 2Faulty ink cartridge chip.
  • 3Loose installation preventing solid contact.
  • 4Wear and tear of metal pins.

Solutions

Quick Diagnostics

Error 1200 means the cartridge chip is unreadable. Clean the copper pins on both the cartridge and the carriage.

Step-by-Step Solution

  1. Access: Open the lid and remove both cartridges.
  2. Clean: Use a dry lint-free cloth to clean all electrical contacts.
  3. Install: Click cartridges into place carefully.
  4. Reset: Power cycle the printer to allow for re-scanning.

Prevention and Maintenance

Avoid finger contact with chip surfaces. Use the official maintenance software to clear clogs monthly.

When to Call a Technician

If the 1200 error persists after cleaning, there may be a damaged internal cable.

Technical Specifications

  • Technology: Thermal Inkjet.
  • Speed: Up to 22 ppm.
  • Connectivity: USB 2.0.
  • Capacity: 100-sheet tray.
  • Compatible Consumables: Lexmark 28/29 series.
  • Recommended Usage: Basic home/office.
  • Official Drivers/Firmware

Steps to follow

  1. 1

    Clean contacts

    Remove the cartridge and wipe the gold pins with a dry, soft cloth.

  2. 2

    Reinstall

    Seat the cartridge firmly until you hear a click.

  3. 3

    Reboot

    Close the cover and cycle the power to reset sensors.

Frequently asked questions

Error 1200 signals a cartridge detection failure due to a poor electrical connection.

Often, error 1200 is just caused by dirt; cleaning the contacts usually resolves it.

Original Lexmark 28/29 series cartridges are recommended to ensure chip compatibility.

Run the Lexmark maintenance tool monthly to prevent nozzle clogs.

Lexmark X2670 error 1200: Solution guide | Vimazdev