1200pixma-ts5320

Canon PIXMA TS5320 error 1200: Troubleshooting guide

The Canon PIXMA TS5320 error 1200 occurs when the output tray mechanism fails to position itself correctly during the initialization phase. It is a common issue that is usually resolved by checking for physical obstacles in the paper path. Many users ask why does my Canon PIXMA TS5320 show error 1200, and the answer is usually a simple tray misalignment.

1 views

Common causes

  • 1Obstruction caused by paper jam in the tray sensor.
  • 2Physical misalignment of the output tray rails.
  • 3Accumulation of dust in the traction gears.
  • 4Temporary firmware glitch identifying the start position.

Solutions

Quick Diagnosis

If you see this notification, visually check if the tray is locked or if small paper fragments are obstructing the movement.

Step-by-step Solution

  1. Unplug the printer from the power supply.
  2. Open the front cover and remove any paper debris.
  3. Ensure the output tray can move freely without resistance.
  4. Reconnect and power on to reset the cycle.

Prevention and Maintenance

Do not overload the tray beyond the suggested capacity. Clean the tray area periodically with compressed air. Using original supplies helps the carriage move without extra load.

When to Call a Technician

If the tray remains immobile after these steps, there may be a motor failure requiring professional assistance.

Device Technical Specs

  • Technology: FINE Inkjet
  • Speed: Up to 13 ipm black
  • Connectivity: Wi-Fi, Bluetooth, USB
  • Capacity: 100 sheets standard
  • Compatible Consumable: FINE Series PG-260/CL-261
  • Recommended Use: Home/Light Office
  • Official drivers / firmware

Steps to follow

  1. 1

    Power cycle

    Unplug the printer from the power source.

  2. 2

    Tray inspection

    Check for physical obstructions in the output tray area.

  3. 3

    Forced restart

    Hold the power button for 10 seconds after replugging.

Frequently asked questions

This error usually indicates a physical obstruction or a misaligned sensor in the output tray.

It is a minor error that is usually resolved by clearing the paper path.

This model uses FINE cartridges (PG-260 and CL-261 series).

Ensure the tray is not overloaded and dust the sensor areas every few months.