1200MAXIFY GX2050

Error 1200 Canon MAXIFY GX2050: Paper Jam Solution

The Canon MAXIFY GX2050 error 1200 is a standard alert indicating a paper feed failure from the main input tray. This happens when sensors detect the paper is not advancing correctly due to obstructions, misalignment, or worn feed rollers. This is a high-efficiency inkjet unit with a refillable tank system. A physical check of the tray usually resolves this issue quickly.

0 views

Common causes

  • 1Poorly loaded paper or incorrectly adjusted tray guides.
  • 2Foreign object obstructing the paper path (clips, staples).
  • 3Dirty or paper-dust-covered feed rollers.
  • 4Overly thick or damp paper preventing the motor from advancing the sheet.

Solutions

Quick Diagnosis

The 1200 error usually appears if the tray guides are too loose, allowing paper to skew as it enters the printing mechanism. If the error persists despite seeing no paper jams, a tiny foreign object (like a paper clip) might be blocking the optical sensor.

Step-by-Step Solution

  1. Remove all paper from the input tray.
  2. Inspect the interior of the machine to remove bits of torn paper or dust buildup.
  3. Reload the paper, ensuring the side guides are snug against the edges of the stack.
  4. Power the printer back on; the feed mechanism will attempt a cleaning and re-feeding cycle.

Prevention and Maintenance

Always fan the paper before loading it to separate sticking sheets. Periodically clean the rubber feed rollers with a lightly dampened cloth to regain grip. Using original Canon ink ensures the print system remains internally clean.

When to Call a Technician

If the 1200 error shows up even with no paper in the tray and after cleaning the rollers, the paper presence sensor could be defective.

Technical Specifications

  • Technology: MegaTank Inkjet
  • Speed: Up to 20 ppm (mono)
  • Connectivity: Wi-Fi, Ethernet, USB
  • Capacity: 250 sheets standard
  • Compatible Consumables: GI-2050 ink bottles
  • Usage: Small office and home
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Check Tray

    Remove the main paper tray and ensure the paper is properly aligned and within the capacity limits.

  2. 2

    Clear Obstructions

    Open the rear or roller access door to gently remove any jammed paper scraps blocking the path.

  3. 3

    Reboot

    Close all lids correctly and restart the printer so the sensor can re-calibrate paper positioning.

Frequently asked questions

This error is an alert that the printer cannot feed paper correctly from the tray, usually due to misalignment or a physical obstruction.

Ensure you fan the paper before loading it and do not exceed the maximum allowed quantity in the tray.

It uses refillable ink bottles from the GI-20/GI-2050 series, designed for low cost per page.

If you notice error 1200 happening often without apparent jams, use a lint-free damp cloth to clean the feed rollers.

Error 1200 Canon MAXIFY GX2050: Paper Jam Solution | Vimazdev