110.33cx622ade

Lexmark cx622ade Error 110.33: Feed Fault

The Lexmark cx622ade error 110.33 refers to a fault in the paper transport system, where the page does not reach the registration sensor within the estimated time. Unlike error 110.32, this usually occurs right out of the tray or in the input module. To fix 110.33 error on Lexmark cx622ade, check the alignment and physical state of the pick-up rollers. It is a machine built for constant productivity in offices.

1 views

Common causes

  • 1Worn or residue-covered pick-up rollers.
  • 2Excessively damp paper preventing fluid drag.
  • 3Tray guides adjusted too tightly.
  • 4Mechanical obstruction in the initial paper path.

Solutions

Quick diagnosis

If you receive this error, open the bottom tray and check if the paper is wrinkled in the leading corner. If the paper looks okay, the pick-up roller might be slipping due to residue.

Step-by-step solution

  1. Remove the paper tray completely.
  2. Clean the rubber rollers visible on the internal upper side of the compartment.
  3. Fan the paper stack and replace it, ensuring the guides fit without pressing the edge.
  4. If the machine attempts to load and stops, try a different pack of paper.

Prevention and maintenance

Change paper if it feels damp. Periodic cleaning of rollers with a lint-free cloth prevents the machine from picking multiple sheets or slipping.

When to call a technician

If the error persists after cleaning the rollers, it might be a fault in the feed solenoid that fails to activate, requiring technical repair.

Equipment technical specifications

  • Technology: Multifunction color laser.
  • Speed/performance: 40 ppm.
  • Connectivity: USB, Gigabit Ethernet, Wi-Fi.
  • Feeding capacity: 650 sheets.
  • Compatible consumable: Unison series 62.
  • Recommended use: Corporate environments.
  • Official drivers / firmware

Steps to follow

  1. 1

    Tray check

    Remove the input tray and verify that the paper guides are not too tight.

  2. 2

    Roller cleaning

    Clean the feed rollers with a slightly damp cloth to improve grip.

  3. 3

    Restart

    Reload paper and close everything so the machine attempts to load again.

Frequently asked questions

The Lexmark cx622ade error 110.33 indicates that paper has not reached the registration sensor in time, pointing to an initial jam.

It is common when using damp paper or if the tray guides are poorly adjusted.

It uses the Unison 62 series toners, which guarantee fluid feeding and superior print quality.

Keep rollers clean and use good quality, flat paper.