110.32cx622ade

Lexmark cx622ade Error 110.32: Paper Jam Solution

The Lexmark cx622ade error 110.32 is a system alert indicating a paper jam in the device's fuser unit. This error usually triggers when sensors detect that a page has not exited in the programmed time, blocking any print process. To fix 110.32 error on Lexmark cx622ade, the paper path in the rear section of the fuser must be inspected. It is a multifunction unit designed for intense office workflows.

1 views

Common causes

  • 1Use of paper outside specifications (incorrect weight).
  • 2Accumulation of label or adhesive residue on rollers.
  • 3Misalignment of paper guides in the input tray.
  • 4Natural wear of pick-up rollers.

Solutions

Quick diagnosis

If the machine shows this message, check for paper fragments visible in the upper output or rear door. Wrinkled paper or a dirty sensor are primary culprits for triggering this code.

Step-by-step solution

  1. Open the front door and remove the toner cartridge if necessary for better visibility.
  2. Open the rear fuser gate and look for jammed paper or small bits.
  3. Extract the paper with both hands in a slow, steady motion.
  4. Close all covers; the machine will automatically detect the clearance and restart.

Prevention and maintenance

Use paper stored in a dry environment to avoid moisture-related deformation. Clean feed rollers with a dry cloth if you notice the machine taking multiple sheets at once.

When to call a technician

If the error persists after cleaning the entire path, the exit sensor might be misaligned or damaged, requiring professional technical assistance.

Equipment technical specifications

  • Technology: Multifunction color laser.
  • Speed/performance: 40 ppm.
  • Connectivity: USB, Gigabit Ethernet, optional Wi-Fi.
  • Feeding capacity: 650 sheets standard.
  • Compatible consumable: Unison series 62 toner (high yield).
  • Recommended use: Corporate environments.
  • Official drivers / firmware

Steps to follow

  1. 1

    Open doors

    Open the front door and rear door to access the paper path.

  2. 2

    Remove paper

    Gently extract any jammed sheet near the fuser roller without pulling too hard.

  3. 3

    Verification

    Close all covers and check that the paper sensor is not blocked.

Frequently asked questions

The Lexmark cx622ade error 110.32 indicates a jam in the paper path, specifically in the fuser area, preventing the page from advancing correctly.

It is an error that stops work immediately, but is easily resolved manually without technical tools.

It uses the Lexmark Unison series 62 toner family, optimized for consistent performance and high image quality.

Ensure you use paper in good condition, without moisture, and properly adjust tray guides to avoid misalignment.