1102X2670

Lexmark X2670 Error 1102: Carriage Jam Solution

The lexmark x2670 error 1102 indicates an obstruction in the printhead carriage path. Users often search for why is my lexmark x2670 showing error 1102 when the printer stalls mid-job. Clearing the track is usually the first step to resolving this issue.

1 views

Common causes

  • 1Debris on the printer guide rail.
  • 2Paper shreds stuck in the scanner or print path.
  • 3Worn-out belt tension.
  • 4Faulty carriage position sensor.

Solutions

Quick Diagnosis

If you hear grinding sounds or the carriage stops moving, you likely have a paper jam or debris interfering with the sliding rails.

Step-by-Step Solution

  1. Disconnect the power plug.
  2. Open the printer cover.
  3. Carefully slide the carriage to the center.
  4. Check the rails and bottom of the carriage for scraps.
  5. Re-power the printer.

Prevention and Maintenance

Keep the printer in a clean area. Periodically wipe the rails with a dry cloth to prevent dust accumulation.

When to Call a Technician

If the carriage still fails to home properly after clearing the path, the carriage motor or belt might be damaged.

Technical Specifications

  • Technology: Inkjet Multifunction.
  • Speed: 22 ppm.
  • Connectivity: USB.
  • Compatible Consumables: Lexmark 14, 15, 28, 29.
  • Usage: Home/Student.
  • Lexmark Support

Steps to follow

  1. 1

    Power Down

    Unplug the printer before performing internal checks.

  2. 2

    Clear Obstructions

    Remove paper scraps from the sliding track.

  3. 3

    Test Movement

    Gently move carriage to ensure smooth operation.

Frequently asked questions

This error code means the printhead carriage is unable to move due to an obstruction.

Yes, but move it slowly and only after the device is disconnected.

Lexmark 14, 15, 28, 29 series.

Clean the rails regularly to avoid friction build-up.