11-1112Xerox Phaser 3260

Troubleshooting Error 11-1112 on Xerox Phaser 3260

Error 11-1112 on the Xerox Phaser 3260 indicates a failure to maintain a stable network connection. This is often caused by IP address mismatches, malfunctioning cabling, or network configuration settings within the local environment.

1 views

Common causes

  • 1IP address conflict within the local subnet.
  • 2Faulty or damaged LAN cable.
  • 3Network switch or router blocking the printer's MAC address.

Solutions

Network Power Cycle

  1. Disconnect the printer from the network.
  2. Power off the printer and the main router.
  3. Wait 60 seconds and turn the router back on before reconnecting the printer.

Static IP Configuration

  1. Access the printer network settings menu.
  2. Disable DHCP and manually set an unused static IP address within your network range.

Steps to follow

  1. 1

    Check cabling

    Ensure the Ethernet cable is secure and lights are active on the port.

  2. 2

    Assign IP

    Manually set a unique IP address on the printer’s control panel.

  3. 3

    Connectivity test

    Print a Network Configuration Report to verify the new settings.

Frequently asked questions

Yes, if another device has the same IP as your printer, connection drops will occur frequently.

Often, yes. Restarting the router forces a refresh of the address assignment table.

Yes, but for office printers, static IPs are recommended to prevent constant re-configuration.

Troubleshooting Error 11-1112 on Xerox Phaser 3260 | Vimazdev