0x98WorkForce WF-7710

Epson WorkForce WF-7710 error 0x98: Fix Guide

Epson WorkForce WF-7710 error 0x98 is a technical notification typically triggered by Wi-Fi or Ethernet communication timeouts. This error is common when your network connection drops or IP conflicts arise. We recommend restarting your router to stabilize the connection.

0 views

Common causes

  • 1IP conflicts on local network.
  • 2Weak Wi-Fi signal.
  • 3Outdated network firmware.
  • 4Gateway configuration mismatch.

Solutions

Diagnóstico rápido

The 0x98 error prevents document printing. Check the printer screen for network status warnings.

Solución paso a paso

  1. Restart your router.
  2. Power cycle the printer.
  3. Refresh network settings.
  4. Check for IP address conflicts.

Prevención y mantenimiento

Update firmware regularly. Static IP assignments prevent most network dropouts.

Cuándo llamar a un técnico

If manual network setup fails, the internal network card may be faulty.

Ficha técnica del equipo

  • Technology: Multifunction Office Printer
  • Connectivity: LAN and Wi-Fi 802.11 b/g/n
  • Compatible Consumables: Epson 252XL Series
  • Recommended Use: Shared office environments
  • Official drivers / firmware

Steps to follow

  1. 1

    Reboot router

    Power cycle your router.

  2. 2

    Check IP

    Verify network settings in the printer menu.

  3. 3

    Reset Network

    Run the Wi-Fi setup wizard again.

Frequently asked questions

It indicates a network timeout in communication.

Only if basic steps fail, as this will clear your configurations.

Use the 252 or 252XL series.

Check every 6 months for stability patches.