0x98WorkForce Pro WF-C879R

Fix Epson WF-C879R Error 0x98: RIPS Ink System Fault

The 0x98 error on the Epson WorkForce Pro WF-C879R indicates a fault within the Replaceable Ink Pack System (RIPS) detection. This happens when the ink pack chip is not correctly identified by the printer's mainboard. The resolution usually involves reseating the ink pack and ensuring the gold contacts are clean and free of debris.

1 views

Common causes

  • 1Dirty contacts: dust or fingerprints on the gold-plated chip.
  • 2Poor seating: pack is not fully locked into the docking bay.
  • 3Communication error: chip fault preventing the board from reading levels.
  • 4Hardware damage: bent pins in the ink compartment.

Solutions

Diagnóstico rápido

This error commonly presents as a 'Consumable Not Recognized' alert. It is frequently localized to a specific ink pack bay. Check if the pack was recently replaced or if the printer was moved.

Solución paso a paso

  1. Open the ink supply door of the WF-C879R.
  2. Remove the ink pack showing the error alert.
  3. Wipe the chip on the ink pack with a dry, lint-free cloth to ensure perfect contact.
  4. Reinsert the ink pack firmly until it clicks into position.

Prevención y mantenimiento

  • Handle with care: Avoid touching the ink pack chip with oily fingers.
  • Keep firmware updated: Official updates often refine chip detection sensitivity.
  • Correct storage: Keep ink packs in their sealed environment until needed.

Cuándo llamar a un técnico

If reseating the pack multiple times does not resolve the 0x98 error, the internal ink sensor assembly may be faulty and requires a service technician to replace the mainboard or sensor unit.

Ficha técnica del equipo

  • Technology: Inkjet RIPS (Replaceable Ink Pack System).
  • Ink Capacity: Up to 86,000 pages (Black).
  • Ink Type: Epson T05A series.
  • Maintenance: Maintenance Box C13T671600.
  • Compatibility: Optimized for high-volume corporate tasks.
  • Drivers / official firmware

Steps to follow

  1. 1

    Identify fault

    Check the panel to identify which ink pack is failing to communicate.

  2. 2

    Remove pack

    Release the pack and take it out of the machine.

  3. 3

    Clean chip

    Clean the contacts carefully using a dry, clean cloth.

  4. 4

    Reinstall

    Push the pack into the slot until it clicks securely.

Frequently asked questions

It is a blocking error that prevents printing, but it is usually simple to fix by reseating the ink pack.

Yes, third-party chips often struggle with the 0x98 protocol, leading to recognition failures.

The printer interface will typically indicate which specific color or bay is failing to register.

Only if used sparingly on a cloth; however, a dry cloth is sufficient and safer for the electronics.

Fix Epson WF-C879R Error 0x98: RIPS Ink System Fault | Vimazdev