0x98Expression Premium XP-8700

Epson Expression Premium XP-8700 error 0x98: Fix

The Epson Expression Premium XP-8700 error 0x98 is a critical communication fault between the main logic board and the print head assembly. This occurs frequently due to dirt on the ribbon cable contacts or a short circuit within the print head itself, preventing standard operation.

1 views

Common causes

  • 1Print head short circuit.
  • 2Damaged or dirty ribbon cables (FPC).
  • 3Ink leakage onto electronic pins.
  • 4Logic board communication failure.

Solutions

Quick Diagnosis

0x98 indicates a loss of signal from the print head. If the error occurred after a cartridge change, ensure no ink leaked onto the electrical pins.

Step-by-Step Solution

  1. Power off the printer and remove the power source.
  2. Remove the cartridges and inspect the print head pins.
  3. Allow the unit to rest for 10 minutes.
  4. Reinsert cartridges firmly and reboot the printer.

Prevention and Maintenance

Avoid third-party cartridges that may leak ink onto sensitive electronic components. Use the built-in maintenance menu for cleaning.

When to Call a Technician

If the error persists despite proper reinstallation, the print head or FPC cable requires professional replacement.

Technical Data

  • Technology: Inkjet (Claria Premium)
  • Speed: Photographic
  • Connectivity: Wi-Fi, Ethernet, USB
  • Capacity: Dedicated trays
  • Compatible consumable: Claria XP series cartridges
  • Usage: Photo printing
  • Official drivers/firmware

Steps to follow

  1. 1

    Power off

    Turn off and unplug the printer.

  2. 2

    Verify

    Check cartridges and proper seating.

  3. 3

    Restart

    Wait 10 minutes and power on.

Frequently asked questions

System detected a failure in the print head or ribbon cable.

If it's just dirty contacts, yes. If the head is gone, it's costly.

Only original Claria Premium inks.

Run regular head cleaning cycles.

Epson Expression Premium XP-8700 error 0x98: Fix | Vimazdev