0x62XP-4155

Error 0x62 Epson Expression Home XP-4155: Motor Failure

The Epson Expression Home XP-4155 error 0x62 points to a main motor load error, often linked to paper feeding or carriage movement. When the motor torque sensor reports high resistance, the printer enters protection mode. Dust buildup is the most common cause.

1 views

Common causes

  • 1Excessive drag in feed rollers.
  • 2Gear dust accumulation.
  • 3Overweight paper usage.
  • 4Motor sensor overload.

Solutions

Diagnóstico rápido

If you hear grinding noises, the 0x62 error indicates that the motor is working harder than it should to move components.

Solución paso a paso

  1. Unplug the power.
  2. Verify the input path for paper scraps.
  3. Clean the rollers with a lint-free cloth.
  4. Reboot after 5 minutes to clear the fault.

Prevención y mantenimiento

Avoid non-standard paper weight. Perform periodic internal cleaning of the rollers to ensure consistent performance.

Cuándo llamar a un técnico

If the 0x62 error reappears after cleaning and resetting, the motor may have internal mechanical damage.

Ficha técnica del equipo

Steps to follow

  1. 1

    Check for paper

    Ensure no paper is stuck in the feed roller.

  2. 2

    Clean rollers

    Use a damp cloth to remove dust from the feed rollers.

  3. 3

    Full reset

    Unplug the power cable for 5 minutes and restart.

Frequently asked questions

This indicates a load fault on the feed motor, implying excessive mechanical resistance.

Yes, if the issue is a minor paper jam or dust on the rollers.

603 series (Starfish); use originals to prevent firmware errors.

Clean monthly with a damp cloth; ensure no water drips inside.

Error 0x62 Epson Expression Home XP-4155: Motor Failure | Vimazdev