0x6100001aOfficeJet Pro 8135e Business

HP OfficeJet Pro 8135e Business Error 0x6100001a: Fix

The HP OfficeJet Pro 8135e Business error 0x6100001a relates to the ink management system. It indicates that the printer cannot correctly detect or pressurize the ink cartridges. Troubleshooting usually involves checking the status and cleanliness of the installed HP ink cartridges.

1 views

Common causes

  • 1Defective cartridge chip preventing proper system recognition.
  • 2Air blockage in the printhead ink pressure system.
  • 3Dirty electrical contacts between cartridge and carriage.
  • 4Incompatibility detected with non-original ink consumables.

Solutions

Diagnóstico rápido

This error occurs when the logic board receives conflicting data from the cartridge chips. Check the panel to see if one specific color is marked as missing or faulty.

Solución paso a paso

  1. Open the ink bay and remove all cartridges.
  2. Clean the chips on the cartridges using a soft, dry cloth.
  3. Inspect the cartridge housing for stray ink drops that might interfere with connectivity.
  4. Reinstall all cartridges until they lock firmly in place.

Prevención y mantenimiento

Only use genuine HP 922/923 ink cartridges. Third-party chips often lack the necessary precision for the 8135e ink pressure calibration. Avoid shaking cartridges excessively or removing them unless necessary.

Cuándo llamar a un técnico

If replacing cartridges with new original ones does not solve the error, the internal ink management board may need repair.

Ficha técnica del equipo

  • Technology: Thermal Inkjet.
  • Speed: 20 ppm.
  • Connectivity: Wi-Fi, Ethernet.
  • Input: 225 sheets.
  • Consumables: HP 922/923 series.
  • Recommended Use: Professional workgroups.
  • Official drivers / firmware

Steps to follow

  1. 1

    Check cartridges

    Remove cartridges and check ink levels.

  2. 2

    Clean contacts

    Clean gold chips with a dry cloth.

  3. 3

    Check vents

    Ensure upper vent tape is removed and not blocked.

  4. 4

    Reset

    Reinstall cartridges and power cycle.

Frequently asked questions

This error alerts about an ink management system failure, indicating detected errors in ink levels or cartridge pressure.

Persistent errors may indicate an air bubble in the pressure system affecting pump efficiency.

Original cartridges are required to keep pressure systems within factory specs.

Perform regular cleaning and avoid leaving cartridges outside the printer.