0x61WorkForce Pro WF-C879R

Fix Epson WF-C879R Error 0x61: Paper Feed Issues

The 0x61 error on the Epson WorkForce Pro WF-C879R is a paper feeding failure, often resulting from rollers failing to grip paper from the tray. It frequently occurs due to dust buildup or small paper remnants blocking the transport path. To resolve this, you must clear the paper path, clean the feed rollers, and ensure the paper tray is correctly aligned.

1 views

Common causes

  • 1Roller contamination: dust and fiber buildup reducing surface friction.
  • 2Tray misalignment: guide settings causing skew during pickup.
  • 3Obstruction: hidden paper particles blocking the transport sensors.
  • 4Component wear: aged rubber rollers losing their grip capacity.

Solutions

Diagnóstico rápido

If the printer initializes but fails to pull the paper after several attempts, the 0x61 error triggers. Check if the printer's feed mechanism is slipping on the paper or if a physical obstruction exists.

Solución paso a paso

  1. Empty the tray and verify that the side guides are snug against the paper stack.
  2. Clean the rubber rollers using a soft cloth dampened with distilled water to restore grip.
  3. Inspect the path for torn paper snippets or staples using a bright light.
  4. Reset the printer by power cycling, then attempt to feed paper manually or via tray.

Prevención y mantenimiento

  • Paper quality: Use high-quality, dry paper to prevent feeding issues and dust formation.
  • Roller maintenance: Monthly cleaning prevents ink-mist and paper dust accumulation on the rubber surfaces.
  • Environment: Keep the tray closed when not in use to avoid contamination.

Cuándo llamar a un técnico

If the rollers are clean and the path is clear but the 0x61 error remains, the feed motor or the paper sensor assembly may require professional replacement.

Ficha técnica del equipo

  • Technology: PrecisionCore Heat-Free.
  • Input Capacity: Standard 250 sheets + options.
  • Duplex: Automatic double-sided printing.
  • Scanner: 50-sheet ADF.
  • Compatible Consumables: T05A ink pack series.
  • Maintenance: Replaceable Maintenance Box C13T671600.
  • Drivers / official firmware

Steps to follow

  1. 1

    Tray reset

    Remove the paper tray and firmly re-seat it into the printer slot.

  2. 2

    Roller cleaning

    Wipe the feed rollers gently to remove accumulated debris.

  3. 3

    Path clearance

    Use a flashlight to check for any paper scraps in the rear or bottom paths.

  4. 4

    Verification

    Run a test page to confirm the mechanical feeding is successful.

Frequently asked questions

Yes, as it prevents any printing activity until the paper transport issue is cleared.

No, this is a mechanical paper transport error, unrelated to the RIPS ink packs.

You need the Epson C13T671600 maintenance box for this model.

Cleaning them every 3-6 months is standard to keep the feeding mechanism running reliably.

Fix Epson WF-C879R Error 0x61: Paper Feed Issues | Vimazdev