Fix Epson Stylus Photo R3000 Error 0x60: Carriage Jam
The 0x60 error code on the Epson Stylus Photo R3000 signals a mechanical obstruction preventing the printhead carriage from moving along its path. This interruption halts all print jobs and requires immediate physical inspection to prevent damage to the drive components. Resolving this efficiently is critical to maintaining the printer's delicate mechanical alignment.
Common causes
- 1Debris or paper remnants physically blocking the carriage movement track.
- 2Dust or oil contamination on the timing strip interfering with position sensors.
- 3Degraded drive belt causing uneven tension during the print cycle.
Solutions
Inspecting the Path
- Power off the printer and unplug the power cable.
- Open the printer cover to reveal the printhead area.
- Carefully remove any stuck paper or debris found along the rails.
- Gently slide the carriage left and right to feel for friction or blockages.
Cleaning the Timing Strip
- Locate the transparent timing strip (encoder strip) behind the carriage.
- Gently wipe the strip with a lint-free cloth dampened with isopropyl alcohol.
- Allow it to air dry for 5 minutes before powering the device back on.
Steps to follow
- 1
Power down
Disconnect the device from the power source to ensure the carriage can be moved without risk of electrical shorts.
- 2
Clear internal debris
Check for obstructions within the printing path and carefully remove them using tweezers if necessary.
- 3
Sensor cleaning
Clean the encoder strip delicately to ensure the optical sensor can read the carriage position correctly.
Frequently asked questions
Yes, provided the power cable is disconnected. Always move it slowly to avoid straining the internal belt mechanism.
Persistent errors may indicate an internal sensor failure or motor wear, requiring professional diagnostics at an authorized center.
It is recommended to inspect the inside of your printer every 3-6 months, especially in dusty environments, to ensure smooth operation.