0x60EcoTank Photo ET-8500

Epson EcoTank Photo ET-8500 Error 0x60: Fix Guide

The Epson EcoTank Photo ET-8500 error 0x60 is a diagnostic alert indicating an issue with the movement of the print head carriage. When the printer cannot perform its standard movement cycle, it interrupts the session to avoid damaging the motor or the encoder. This guide explores how to identify obstructions and perform simple maintenance to clear the fault.

0 views

Common causes

  • 1Physical obstruction in the carriage path.
  • 2Dirty encoder strip causing positioning loss.
  • 3Worn-out carriage guide rails.
  • 4Internal timing error on the logic board.

Solutions

Diagnóstico rápido

If you see '0x60' on your control panel, the printer has detected an inconsistency in the position or resistance of the print head carriage.

Solución paso a paso

  1. Disconnect the printer from electrical power.
  2. Manually move the carriage to check for smooth operation.
  3. Check the area below the track for small paper bits.
  4. Clean the transparent encoder strip with a dry microfiber cloth.

Prevención y mantenimiento

Prevent paper jams by loading standard weights correctly. Regular light cleaning of the internal carriage track with a dry cloth is recommended.

Cuándo llamar a un técnico

If the carriage is clear of obstructions but the 0x60 error remains, the motor or the timing sensor board may need replacement.

Ficha técnica del equipo

  • Technology: 6-color Inkjet.
  • Speed: 32 ppm monochrome.
  • Connectivity: Wi-Fi/Ethernet.
  • Compatible consumables: Epson 552 series.
  • Recommended use: Professional photo/graphic tasks.
  • Official drivers / firmware

Steps to follow

  1. 1

    Power off and unplug

    Shut down the printer and disconnect the power cord safely.

  2. 2

    Inspect carriage

    Open the lid and gently move the carriage back and forth to feel for obstructions.

  3. 3

    Clear debris

    Remove any paper bits, clips, or foreign objects found along the track.

Frequently asked questions

Error 0x60 is typically related to the printer's inability to move the print head carriage as expected, often due to physical resistance.

No, you should never force the carriage. If it won't move freely, there may be internal debris or a more serious motor problem.

Use official Epson Claria ET Premium ink bottles only to ensure print head longevity.

Routine head cleaning is recommended every few months, keeping the exterior dust-free for best operation.

Epson EcoTank Photo ET-8500 Error 0x60: Fix Guide | Vimazdev