0x5aSureColor P600

Epson SureColor P600 error 0x5a: Troubleshooting

The Epson SureColor P600 error 0x5a is a system notification of a failure in the pump assembly or ink purging station. This problem typically arises when the machine detects resistance while attempting a cleaning cycle, halting the print process. It is common in high-performance units lacking regular maintenance of the waste pads.

1 views

Common causes

  • 1Accumulation of dried ink in the pump.
  • 2Faulty position sensor in the purge station.
  • 3Mechanical wear of pump gears.
  • 4Print carriage misalignment.

Solutions

Diagnóstico rápido

If the print carriage moves erratically or stops suddenly at startup, check for this specific error. Why does my Epson SureColor P600 show error 0x5a? It is typically caused by solidified ink that blocks the pump.

Solución paso a paso

  1. Power down: Turn off the printer and disconnect the power cord.
  2. Check carriage: Move the print head gently to ensure it's not locked.
  3. Clean station: Remove excess ink from the purge pads.
  4. Test run: Power back on to verify if the pump clears the error.

Prevención y mantenimiento

Clean the print head station every 6 months. Avoid leaving the printer unused for long periods to prevent ink drying. Always use original cartridges to ensure proper ink viscosity.

Cuándo llamar a un técnico

If the error persists after cleaning, the pump motor might be burnt out and requires professional replacement.

Ficha técnica del equipo

  • Technology: UltraChrome Inkjet
  • Quality: 5760 x 1440 dpi
  • Connectivity: Wi-Fi, Ethernet, USB
  • Feed: 9 individual ink cartridges
  • Consumables: T760 series
  • Recommended use: Professional photography/arts
  • Official drivers / firmware

Steps to follow

  1. 1

    Power down

    Turn off the printer and disconnect the power cord.

  2. 2

    Check carriage

    Move the print head gently to ensure it's not locked.

  3. 3

    Clean station

    Remove excess ink from the purge pads.

  4. 4

    Test run

    Power back on to verify if the pump clears the error.

Frequently asked questions

This error occurs when the ink pump or purging station fails to initialize.

Using non-original ink can cause nozzle clogs and pump failure.

Yes, a stuck pump can lead to ink spills inside the carriage assembly.

Print a test page weekly to maintain ink flow and keep the pump lubricated.

Epson SureColor P600 error 0x5a: Troubleshooting | Vimazdev