0x0110SureColor P6000

Epson SureColor P6000 error 0x0110: Network Fault

The Epson SureColor P6000 error 0x0110 indicates an issue with the internal network interface. This error effectively prevents the plotter from receiving print jobs from remote workstations. This guide outlines how to verify your settings and physical connections.

1 views

Common causes

  • 1IP address conflict on the local LAN.
  • 2Faulty Ethernet patch cable.
  • 3Port lockout at the network switch.
  • 4Bug in the network communication firmware.

Solutions

Quick Diagnosis

If you see 0x0110, check if the Ethernet activity lights on the plotter panel are solid, flashing, or dark.

Step-by-Step Solution

  1. Verify Physical Path: Test with a new Cat 6 cable and move to a different switch port.
  2. Reset Settings: Navigate to the 'Network' menu on the front panel and select 'Reset'.
  3. Set Static IP: Configure a fixed local IP to eliminate DHCP conflicts.
  4. Update Firmware: Check official Epson support for the latest networking improvements.

Prevention and Maintenance

Use high-quality cabling and ensure the plotter is on a stable network environment, isolated from consumer devices.

When to Call a Technician

If the plotter cannot maintain an Ethernet link after resetting to defaults, the main logic board network port may need service.

Technical Specifications

Frequently asked questions

This code identifies a network communication failure, likely due to an IP conflict or local network hardware issue.

You can clear network settings from the plotter's front control panel under the Network menu.

Updates often include improvements to network stability; if resets fail, updating is a recommended next step.

For large-format printing, a direct wired Ethernet connection is strongly recommended over Wi-Fi.