0x0080SureColor P6000

Epson SureColor P6000 error 0x0080: Maintenance

The Epson SureColor P6000 error 0x0080 points to a failure in the ink pump mechanism. This error occurs when the printer cannot perform its necessary head cleaning cycles. If you ask why does my Epson SureColor P6000 show error 0x0080, it likely indicates a clogged pump or a full waste ink reservoir.

0 views

Common causes

  • 1Hardened ink blockage in the suction pump.
  • 2Waste ink maintenance tank full.
  • 3Suction pump position sensor failure.
  • 4Gear wear in the ink pump drive train.

Solutions

Diagnóstico rápido

Occurs when the pump mechanism fails to cycle during startup. Listen for clicking sounds as the pump attempts to rotate.

Solución paso a paso

  1. Power off the printer.
  2. Check and replace the maintenance tank if necessary.
  3. Inspect the printer's interior for any visible ink spills that might restrict pump movement.
  4. Restart to allow a system re-calibration.

Prevención y mantenimiento

Always replace the waste ink tank as soon as the printer prompts you. Proactive maintenance prevents ink from overflowing into the mechanical parts of the pump unit.

Cuándo llamar a un técnico

If the motor cannot rotate freely, the pump unit is likely damaged by hardened ink and requires an professional replacement.

Ficha técnica del equipo

  • Technology: Large Format Printer
  • Compatible consumable: UltraChrome HD
  • Connectivity: USB, LAN
  • Recommended use: Professional photo printing
  • Official drivers / firmware