0x0004SureColor S80600

Epson SureColor S80600 Error 0x0004: Network Fault

The Epson SureColor S80600 error 0x0004 indicates an interruption in communication between the printer and the local network. It is a common configuration issue or LAN cable problem preventing the RIP software from sending job orders. Solving this usually involves network reconfiguration.

1 views

Common causes

  • 1IP address conflict on the local network.
  • 2Deteriorated or poor-quality Ethernet cable.
  • 3Firewall configuration on the PC blocking the RIP.
  • 4Saturated or damaged printer network port.

Solutions

Quick Diagnostics

If the printer is unresponsive to print jobs and shows code 0x0004, first check if the Ethernet port LEDs are lit on the back of the device.

Step-by-Step Solution

  1. Check cables: Unplug and reconnect the Ethernet cable, ensuring activity LEDs are flashing.
  2. Configure IP: Check network settings to ensure the IP address is static and has no conflicts.
  3. Ping test: Perform a ping test from your computer to the printer to verify direct communication.

Prevention and Maintenance

Use shielded Cat6 cables. Always assign a fixed IP address to the printer to prevent DHCP-related disconnections. Turn off the device via the panel before unplugging the network.

When to Call a Technician

If after configuring a static IP and trying a new cable the error persists, the printer's network port (RJ45) may be physically damaged.

Equipment Technical Data

  • Technology: Industrial solvent printer
  • Speed/Performance: 95 m2/h
  • Connectivity: Ethernet (10/100/1000 Mbps)
  • Media handling: Large format rolls
  • Compatible consumables: GS3 inks (high-capacity system)
  • Recommended use: Networked production environments
  • Official drivers / firmware

Steps to follow

  1. 1

    Check cables

    Unplug and reconnect the Ethernet cable, ensuring activity LEDs are flashing.

  2. 2

    Configure IP

    Check network settings to ensure the IP address is static and has no conflicts.

  3. 3

    Ping test

    Perform a ping test from your computer to the printer to verify direct communication.

Frequently asked questions

Error 0x0004 occurs when the printer loses communication with the local network or the printing RIP software.

Check your router, network cable, and ensure the Windows firewall is not blocking the printer port.

Always use the latest drivers downloaded directly from the official Epson portal.

It is uncommon if the network is stable; it usually happens due to DHCP changes or damaged cables.

Epson SureColor S80600 Error 0x0004: Network Fault | Vimazdev