0x000045ColorQube 8580

Xerox ColorQube 8580 error 0x000045: Heating Issue

The Xerox ColorQube 8580 error 0x000045 is a critical heating system fault. Because solid ink technology depends on precise wax melting, any temperature variance prevents the ink from reaching the drum. Understanding this error is essential for maintaining your ColorQube 8580.

1 views

Common causes

  • 1Failed thermistor sensor.
  • 2Burned out internal heater filament.
  • 3Debris buildup in the solid ink melt path.
  • 4Main board control circuit failure.

Solutions

Diagnóstico rápido

If the printer reports this error, the heat-up cycle is failing. The printer may feel cold to the touch even after a warm-up cycle is initiated.

Solución paso a paso

  1. Power cycle: Turn off, unplug, and allow the heater unit to cool down for 20 minutes.
  2. Check solid ink: Ensure the ink blocks are seated properly and the feed path is clear.
  3. Check temp: Power on and monitor if the printer reaches operating temperature.

Prevención y mantenimiento

Keep the machine in power-save mode rather than turning it off completely. Always use genuine Xerox ink sticks to prevent wax impurities from jamming the internal heaters.

Cuándo llamar a un técnico

If the heating element does not trigger after a power cycle, the internal heating element has failed and requires professional servicing.

Ficha técnica del equipo

  • Technology: Solid Ink
  • Speed: 51 ppm
  • Connectivity: USB / Ethernet
  • Consumables: Solid Ink sticks (8580 series)
  • Usage: High Production
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Power cycle

    Turn off, unplug, and allow the heater unit to cool down for 20 minutes.

  2. 2

    Check solid ink

    Ensure the ink blocks are seated properly and the feed path is clear.

  3. 3

    Check temp

    Power on and monitor if the printer reaches operating temperature.

Frequently asked questions

The printer is unable to reach the required temperature to melt the solid ink blocks.

No, but it wastes energy and will simply continue to display the error until fixed.

Genuine solid ink sticks are mandatory to keep the internal heaters clean.

Leave it in sleep mode; this minimizes the thermal stress on the heater elements.