0x000042ColorQube 8580

Fix Xerox ColorQube 8580 Error 0x000042

Xerox ColorQube 8580 error 0x000042 signals a warming delay in the fuser assembly. Unlike critical overheating, this code means the printer is struggling to heat up fast enough to melt the wax sticks.

1 views

Common causes

  • 1Thermal plate degradation: Slow heating response.
  • 2Ambient temp: Too cold for effective startup.
  • 3Thermistor: Failing to report rise correctly.
  • 4Power source: Inconsistent voltage to heater.

Solutions

Quick Diagnosis

If your printer struggles to start and displays 0x000042, it hasn't reached working temperature. Ensure the room isn't overly cold.

Step-by-Step Solution

  1. Power off entirely.
  2. Leave disconnected for 15 minutes.
  3. Ensure ambient temperature is at least 18°C.
  4. Boot and wait for the warm-up sequence.

Maintenance and Prevention

Regular use keeps the heating components in optimal condition. Keep the unit away from A/C vents.

When to Call a Technician

If the heating element continues to time out, the internal plate or temperature sensor requires professional replacement.

Technical Data

Steps to follow

  1. 1

    Thermal reset

    Power off and let the unit fully reach room temp.

  2. 2

    Check area

    Clear any obstruction near the fuser.

  3. 3

    Test run

    Power on and wait for warm-up.

Frequently asked questions

This indicates the unit failed to reach the operating temperature in the required timeframe.

No, it's a safety shutdown feature to protect the printer from cold-ink printing.

Yes, authentic solid ink blocks have the precise melting characteristics your printer relies on.

If the error occurs after letting the unit sit, the heating plate is likely failing.