0x000041SureColor F570

Epson SureColor F570 Error 0x000041 Fix Guide

The Epson SureColor F570 error 0x000041 is a critical alert signaling a positioning issue with the printhead carriage. This occurs when the control board fails to track the exact location of the carriage due to encoder contamination or physical resistance. By checking the belt and carriage path, most users can resolve the issue without external help. This model is engineered for high-precision sublimation, making clean maintenance routines essential for longevity.

1 views

Common causes

  • 1Contaminated encoder strip: Ink mist blocking the sensors.
  • 2Mechanical path obstruction: Debris blocking the carriage movement.
  • 3Communication error: Unstable ribbon cable connection.
  • 4Motor fatigue: Long-term operational wear on the drive assembly.

Solutions

Diagnóstico rápido

Error 0x000041 manifests with the display locking and flashing. If you notice grinding sounds upon startup, it strongly suggests a physical obstruction or an encoder strip obscured by ink mist.

Solución paso a paso

  1. Power cycle: Power off the printer, wait a minute, and turn it back on.
  2. Clean encoder: Clean the encoder strip gently using a lint-free dry cloth.
  3. Update firmware: Use the official Epson utility to update your firmware.
  4. Physical check: Ensure the printhead carriage moves freely without any obstruction.

Prevención y mantenimiento

Avoid touching the encoder strip. Keep the print area free of dust. If the printer sits idle, perform a short nozzle test weekly to maintain pump health.

Cuándo llamar a un técnico

Persistent 0x000041 errors suggest internal hardware damage to the carriage motor or mainboard, which requires a professional service diagnostic.

Ficha técnica del equipo

  • Technology: Dye-Sublimation
  • Width: 24 inch
  • Connectivity: USB, Ethernet, Wi-Fi
  • Input: Roll paper / cut sheet
  • Consumable: Original Epson DHE series ink bottles
  • Usage: Textiles and custom merch
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Power cycle

    Power off the printer, wait a minute, and turn it back on.

  2. 2

    Clean encoder

    Clean the encoder strip gently using a lint-free dry cloth.

  3. 3

    Update firmware

    Use the official Epson utility to update your firmware.

  4. 4

    Physical check

    Ensure the printhead carriage moves freely without any obstruction.

Frequently asked questions

It signals a communication failure between the carriage and the mainboard.

No, this error engages a safety lock to prevent mechanical motor damage.

Only genuine Epson DHE sublimation inks (140ml bottles).

Run regular head cleaning cycles if the printer is left unused for more than a few days.

Epson SureColor F570 Error 0x000041 Fix Guide | Vimazdev