0x00000041imageRUNNER 1643i

Canon imageRUNNER 1643i error 0x00000041: Network Fix

Canon imageRUNNER 1643i error 0x00000041 indicates a network communication failure that interrupts printing and scanning services. It typically stems from IP configuration issues or physical connection problems. Use our troubleshooting steps to fix error 0x00000041 and restore your device's connectivity.

1 views

Common causes

  • 1Local IP address conflict with other devices.
  • 2DHCP server failure or router timeout.
  • 3Damaged Ethernet cable (internal wire breaks).
  • 4Incorrect subnet mask configuration.

Solutions

Diagnóstico rápido

Sudden connectivity loss is usually caused by IP conflicts in the local network or temporary router issues.

Solución paso a paso

  1. Check Cables: Unplug and reconnect the Ethernet cable; restart your router for Wi-Fi setups.
  2. Set Static IP: Navigate to network settings and ensure the IP address is static and unique.
  3. Network Reset: Select the 'Reset network settings' option from the device control panel.
  4. Ping Test: Perform a ping command to the printer's IP from a computer to verify connectivity.

Prevención y mantenimiento

Always configure printers with static IPs (outside the automatic DHCP pool) to ensure other network devices don't clash with the printer's address.

Cuándo llamar a un técnico

If resetting the network configuration and swapping cables doesn't work, the integrated network port or Wi-Fi card may have failed.

Ficha técnica del equipo

  • Technology: Monochrome Laser
  • Speed/Performance: 43 ppm
  • Connectivity: USB, Ethernet, Wi-Fi
  • Paper Capacity: 650 sheets
  • Compatible Consumable: Canon 057 / 057H Series
  • Usage: Heavy-duty office environment
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Check Cables

    Unplug and reconnect the Ethernet cable; restart your router for Wi-Fi setups.

  2. 2

    Set Static IP

    Navigate to network settings and ensure the IP address is static and unique.

  3. 3

    Network Reset

    Select the 'Reset network settings' option from the device control panel.

  4. 4

    Ping Test

    Perform a ping command to the printer's IP from a computer to verify connectivity.

Frequently asked questions

This error means there's an IP conflict or the network card is unable to establish a link with the router.

It doesn't affect mechanical safety, but it disables network printing from all connected devices.

No, toner has no relation to network connectivity issues.

Assign a static IP outside your router's DHCP range to prevent address conflicts.