093-933VersaLink C605

Xerox VersaLink C605 error 093-933: Empty Toner

The Xerox VersaLink C605 error 093-933 is a standard notification signifying that a toner cartridge has hit its end-of-life threshold. The printer uses a smart chip to track supply levels, preventing operation once empty to protect the drum. Resolving this error simply involves swapping the specified cartridge.

0 views

Common causes

  • 1Empty toner cartridge detected by the smart chip sensor.
  • 2Consumable chip damaged or unrecognized by the system.
  • 3Improper cartridge installation preventing pin contact.
  • 4Build-up of dust on the cartridge contact points.

Solutions

Diagnóstico rápido

Error 093-933 features a clear screen message identifying the specific depleted color (C, M, Y, or K). It is a supply-level status rather than a hardware malfunction.

Solución paso a paso

  1. Identify color: Check the control panel to see exactly which of the four cartridges is empty.
  2. Replace cartridge: Open the front cover and remove the empty cartridge. Insert the new one firmly until it clicks into place.
  3. Validation: Close the door and wait 15 seconds; the system will auto-reset the toner sensor.

Prevención y mantenimiento

Always keep a set of spare original cartridges in stock. Wipe excess toner dust out of the bay with a lint-free cloth during every cartridge change to ensure stable contact.

Cuándo llamar a un técnico

If replacing the cartridge with a new original unit fails to clear the code, internal chip contact damage might need professional inspection.

Ficha técnica del equipo

  • Technology: Multifunction Color Laser
  • Speed/Output: 55 ppm
  • Connectivity: Ethernet, USB
  • Feeding capacity: 700-sheet
  • Compatible consumable: Xerox VersaLink C605 Series (Originals)
  • Usage: Corporate environments
  • Official drivers / firmware

Steps to follow

  1. 1

    Identify color

    Check the control panel to see which of the four cartridges is empty.

  2. 2

    Replace cartridge

    Open the front cover and remove the empty cartridge, insert the new one until it clicks.

  3. 3

    Validation

    Close the door and wait for the system to automatically recognize the new supply.

Frequently asked questions

This indicates that a toner cartridge has reached the end of its life and must be replaced.

Yes, the device will stop printing until a recognized cartridge is installed.

Use original C605 series consumables to protect the imaging drum and ensure high print quality.

Use a dry, lint-free cloth to remove excess toner dust inside the cartridge bay.

Xerox VersaLink C605 error 093-933: Empty Toner | Vimazdev