093-929ColorQube 9303

Xerox ColorQube 9303 error 093-929: Maintenance

The Xerox ColorQube 9303 error 093-929 is a mandatory maintenance alert indicating the waste ink tank has reached capacity. Unlike other errors, this requires replacing the receptacle to avoid internal ink residue leaks inside the machine chassis.

1 views

Common causes

  • 1Waste container completely full.
  • 2Container presence sensor blocked.
  • 3Maintenance unit not recognized.
  • 4Anchor mechanism wear.

Solutions

Quick Diagnosis

If the message appears asking to replace the container, the machine will lock to prevent environmental damage from ink leaks.

Step-by-Step Solution

  1. Open the side waste access door.
  2. Remove the used container carefully.
  3. Install a new, original waste container.
  4. Close the door and wait for the system to recognize it automatically.

Prevention and Maintenance

Never force the opening of a full container; residues can permanently stain office surfaces. Always have a spare unit on hand.

When to Call a Technician

If after placing a new container the machine does not detect the change, the contact sensor may require professional cleaning.

Technical Data

Frequently asked questions

It indicates the waste ink container is full and must be replaced or emptied.

Manual emptying is not recommended; it should be replaced with a new unit to ensure sensor cleanliness.

Yes, the optical sensor needs to detect a clean receptacle to allow printing.

Depends on print volume; the machine will provide an advance warning.

Xerox ColorQube 9303 error 093-929: Maintenance | Vimazdev