093-919WorkCentre 6515

Xerox WorkCentre 6515 Error 093-919: Toner Empty Fix

The Xerox WorkCentre 6515 error 093-919 displays on the UI when one of the CMYK toner cartridges is flagged as empty by the system. This check prevents poor print quality and potential damage to internal imaging units. Most users search for how to clear error 093-919 on Xerox 6515 by correctly replacing the specific depleted cartridge.

1 views

Common causes

  • 1Toner depletion: The cartridge page count has reached 0%.
  • 2Chip failure: Damaged or invalid toner chip data.
  • 3Dirty contacts: Accumulated toner dust on cartridge chips.
  • 4Improper seating: Toner not fully pushed into its slot.

Solutions

Diagnóstico rápido

Error 093-919 signifies that a toner cartridge has reached its page limit. The display usually specifies which color is causing the fault. If you replace the cartridge and the error remains, clean the internal contact pins gently.

Solución paso a paso

  1. Identification: Check the display to see which toner color is labeled as 'empty'.
  2. Removal: Open the front cover, slide out the relevant toner cartridge, and remove it.
  3. Installation: Install a fresh, genuine toner cartridge, ensuring it locks into place.
  4. Verification: Close the cover and wait for the machine to finish its automatic self-calibration process.

Prevención y mantenimiento

Keep spare toner on hand to avoid downtime. Using genuine consumables prevents chip read errors. Clean the internal toner bay with a dry cloth periodically to ensure good electrical connectivity.

Cuándo llamar a un técnico

If the printer fails to recognize new, original cartridges repeatedly, there might be a fault in the internal reader circuit that requires professional diagnostic and repair.

Ficha técnica del equipo

  • Technology: LED Digital
  • Speed: 30 ppm
  • Connectivity: USB 3.0, Ethernet, Wi-Fi
  • Input Capacity: 250 sheets + 50 (bypass)
  • Consumible compatible: 106R03480-3483 Series Toner
  • Recommended Use: High-volume office printing
  • Official drivers / firmware

Frequently asked questions

This error is resolved by replacing the specific toner cartridge indicated on the control panel. Ensure you use a genuine cartridge for proper chip recognition.

Yes, the printer will suspend all printing operations until the exhausted toner cartridge has been replaced.

Third-party toners often have incompatible chips, which can lead to persistent error messages like 093-919.

You should wipe out the toner bay with a dry, lint-free cloth whenever you replace a cartridge to prevent dust buildup.