093-919phaser-4510

Xerox Phaser 4510 error 093-919: Toner empty

The Xerox Phaser 4510 error 093-919 is a specific alert that the toner supply is exhausted. Ensuring that the cartridge is seated correctly is crucial for the internal sensors to recognize it. Follow this guide to replace the unit efficiently and continue your workflow.

1 views

Common causes

  • 1Empty toner cartridge.
  • 2Faulty toner chip communication.
  • 3Obstructed toner sensors.
  • 4Improper installation.

Solutions

Diagnóstico rápido

Printing stops and this specific error code appears. What does 093-919 error mean in Xerox? It indicates the cartridge needs to be replaced.

Solución paso a paso

  1. Open: Open the printer front door.
  2. Remove: Pull the used toner cartridge out.
  3. Install: Insert the new Xerox toner cartridge firmly.
  4. Calibrate: Close the door and let the system verify the supply.

Prevención y mantenimiento

Keep the printer surface free from dust. If the error code remains after installation, check that the cartridge chip isn't obscured by debris.

Cuándo llamar a un técnico

If replacing the cartridge doesn't clear the error, the sensor mechanism may require a professional look.

Ficha técnica del equipo

  • Technology: Laser printing
  • Compatible Consumable: Phaser 4510 Toner
  • Consumable Life: Standard yield
  • Care: Sensor area cleaning
  • Official drivers / firmware

Frequently asked questions

It signals that the printer's toner sensor cannot detect sufficient toner, usually because the cartridge is empty or the chip is faulty.

Yes, provided the chip matches the Xerox specs to ensure communication with the printer.

Yes, clearing any toner dust from the sensor path during replacement improves longevity.

Keep a spare toner unit on hand, especially for critical printing tasks.