093-919Xerox Phaser 3260

Fix Xerox Phaser 3260 Error 093-919: Low Toner Guide

The 093-919 error code on the Xerox Phaser 3260 is a maintenance alert indicating low toner levels. This message is triggered by the internal sensor detecting that the toner cartridge is near its end-of-life. Resolving this promptly ensures high-quality output and prevents hardware wear.

1 views

Common causes

  • 1The toner cartridge is empty and requires a physical replacement.
  • 2The sensor inside the printer is obscured by toner dust.
  • 3The cartridge's chip is incompatible or failing to transmit data.

Solutions

Toner Replacement

  1. Open the front cover of the printer.
  2. Gently remove the empty toner cartridge.
  3. Install a genuine Xerox replacement cartridge.
  4. Close the front cover and allow the printer to recalibrate.

Chip Cleaning

  1. Remove the toner cartridge to inspect the contact chip.
  2. Use a dry, lint-free cloth to clean the metal contacts.
  3. Re-insert the cartridge firmly into the slot.

Steps to follow

  1. 1

    Power down

    Switch off the printer and open the front access panel.

  2. 2

    Service the chip

    Clean the contacts of the cartridge with a dry microfiber cloth.

  3. 3

    Reboot

    Re-seat the cartridge and turn the device back on.

Frequently asked questions

Yes, once the toner level hits a critical threshold, printing is suspended to protect the drum.

Shaking can temporarily fix the error if some toner remains, but replacement is the permanent solution.

No, it automatically clears once a properly functioning toner cartridge is detected.

Fix Xerox Phaser 3260 Error 093-919: Low Toner Guide | Vimazdev