091-913Phaser 6515DN

Xerox Phaser 6515DN Error 091-913: Fix and Causes

The Xerox Phaser 6515DN error 091-913 indicates that the waste toner container is full. This part collects excess print dust; once full, the machine stops to prevent spills. Users often search for how to fix 091-913 error on Xerox Phaser 6515DN to keep working. Understanding why does my Xerox Phaser 6515DN show error 091-913 is key for essential maintenance.

1 views

Common causes

  • 1Waste container lifespan reached.
  • 2High usage of high-color-coverage prints.
  • 3Sensor for toner level blocked or dirty.
  • 4Incorrect installation of the new original unit.

Solutions

Quick Diagnosis

The display will show 'Waste Toner Full'. If ignored, the printer will remain locked to prevent toner leaks.

Step-by-Step Solution

  1. Open the front door of the printer.
  2. Pull the waste container (the black unit) firmly to remove it.
  3. Insert the new container (do not reuse the full one).
  4. Close the door and the sensor will reset the error.

Prevention and Maintenance

Keep a spare waste container in stock. Its lifespan depends on printing volume and color coverage.

When to Call a Technician

If the error persists with a new original container, the internal waste sensor may have a connection fault.

Device Technical Sheet

  • Technology: Multifunction color laser printer
  • Resolution: 1200 x 2400 dpi
  • Connectivity: USB, Ethernet, Wi-Fi
  • Speed: 30 ppm
  • Compatible Consumable: Phaser 6515DN waste toner unit
  • Recommended Use: Small offices and workgroups
  • Official Drivers / firmware

Steps to follow

  1. 1

    Open

    Open the front door to access the waste container.

  2. 2

    Remove

    Remove the container carefully to avoid spills.

  3. 3

    Replace

    Insert a new, original waste container.

  4. 4

    Confirm

    Close the door and the error will clear.

Frequently asked questions

The waste toner container has reached its maximum capacity and must be replaced.

It is not recommended, as toner is fine dust that can harm your health or the printer.

You need the original waste toner unit for the Phaser 6515 series.

Yes, printing is blocked until an empty container is installed to prevent internal spills.