091-912Xerox VersaLink C405

Xerox VersaLink C405 Error 091-912 - Maintenance Guide

Error 091-912 indicates that the waste toner container in your VersaLink C405 is full. The device will stop operations to prevent toner spills and internal damage. This is a standard user-replaceable maintenance task.

1 views

Common causes

  • 1Waste toner bottle reached its maximum capacity.
  • 2Sensor obstructed by excess toner dust or debris.
  • 3Waste container not fully inserted into the housing.

Solutions

Replace Waste Toner Bottle

  1. Open the front cover of the printer.
  2. Locate the waste toner container.
  3. Release the latch, remove the full unit, and install a new one.
  4. Close the front cover securely.

Sensor Check

  1. Ensure the new cartridge is properly seated.
  2. Wipe any loose toner from the sensor area if the error persists.

Steps to follow

  1. 1

    Open access

    Use the handle to open the printer's front door.

  2. 2

    Release bottle

    Press the lever to release the old waste toner container.

  3. 3

    Insert new

    Push the new container into place until it clicks.

Frequently asked questions

No, this is a sealed consumable; trying to empty it can cause health hazards and sensor failure.

Replacement intervals vary by usage; the printer will notify you when capacity is low.

No, the error will prevent operation to protect the internal drum and imaging units from overflow.