077-108AltaLink C8035

Xerox AltaLink C8035 error 077-108: Troubleshooting

The Xerox AltaLink C8035 error 077-108 indicates a sensor error within the output finisher path. This often triggers after a paper jam leaves residual scrap. It is a standard safety stop for Xerox high-volume systems.

1 views

Common causes

  • 1Undetected paper jam.
  • 2Sensor dust buildup.
  • 3Finisher misalignment.
  • 4Sensor failure.

Solutions

Diagnóstico rápido

Check if a page is stuck in the exit path.

Solución paso a paso

  1. Open the finisher/output door.
  2. Remove any paper fragments.
  3. Clean the sensors with compressed air.
  4. Reboot the machine.

Prevención y mantenimiento

Perform quarterly sensor cleaning to avoid debris build-up.

Cuándo llamar a un técnico

If the error persists despite cleaning, the optical sensor or finisher motor may be damaged.

Ficha técnica del equipo

  • Tech: Multi Laser Color
  • Speed: 35 ppm
  • Connectivity: Ethernet
  • Capacity: 5,140 sheets
  • Consumibles: AltaLink C8000 toner
  • Use: Corporate
  • Xerox Support

Steps to follow

  1. 1

    Check tray

    Open output area.

  2. 2

    Clean

    Use compressed air.

  3. 3

    Reboot

    Power cycle.

Frequently asked questions

Exit sensor blockage.

Just halts workflow.

Original C8000 series.

Regular sensor dusting.

Xerox AltaLink C8035 error 077-108: Troubleshooting | Vimazdev