077-106Xerox WorkCentre 6515

Fixing 077-106 Error on Xerox WorkCentre 6515

The 077-106 error is a common alert related to the paper feeding system in the Xerox WorkCentre 6515. It triggers when the input sensor fails to detect paper reaching the registration area within the expected time frame. This issue interrupts print jobs but is typically resolved through basic tray maintenance.

1 views

Common causes

  • 1Feed rollers dirty from toner dust accumulation.
  • 2Paper misaligned or tray guides set too tightly.
  • 3Using paper outside of supported weight specifications.

Solutions

Cleaning the Rollers

  1. Remove the paper tray completely.
  2. Wipe the feed rollers with a lint-free cloth dampened with water.
  3. Ensure the rollers are completely dry before reinserting the tray.

Adjusting Paper Guides

  1. Make sure the guides touch the edges of the stack gently.
  2. Do not fill the tray above the maximum capacity line.
  3. Fan the paper stack to prevent static build-up.

Steps to follow

  1. 1

    Check for obstructions

    Open the front door and inspect the paper path for small torn scraps of paper.

  2. 2

    Inspect rollers

    Manually rotate the pick-up rollers to ensure they are free of debris.

  3. 3

    Re-seat tray

    Close the tray firmly and verify the printer settings for the paper size and type.

Frequently asked questions

Not always; it is often a sensor error caused by worn or dirty feed rollers.

Yes, but you must select the correct paper type in the control panel for the printer to adjust speed.

If cleaning the rollers does not help, the maintenance kit may need to be replaced.

Fixing 077-106 Error on Xerox WorkCentre 6515 | Vimazdev