077-106WorkCentre 5945

Xerox WorkCentre 5945 error 077-106: Paper Jam Fix

The Xerox WorkCentre 5945 error 077-106 is a paper jam warning located in the registration zone of the printer. This code prevents printing because sensors fail to detect paper advance within the correct timeframe. Most of the time it is due to poor sheet alignment in the tray or a buildup of residue on the rollers.

0 views

Common causes

  • 1Improper paper loading: Guides are not adjusted, causing the sheet to tilt.
  • 2Dirty rollers: Residue buildup reducing traction.
  • 3Blocked sensors: Label or paper debris blocking the sensor path.
  • 4Damp paper: Environmental humidity causes sheets to stick together.

Solutions

Quick Diagnosis

The 077-106 error appears when the machine tries to feed a sheet and locks up before reaching the fuser. People often ask, how to clear error 077-106 on Xerox 5945? First, check if the paper is correctly loaded and not damp.

Step-by-Step Solution

  1. Open trays: Pull out the paper tray, check for crumpled sheets, and remove them.
  2. Clean sensors: Open the side door. If you see pieces of paper, extract them carefully. Use compressed air on the registration area sensors.
  3. Restart: Close all covers. The sensor will detect the path is clear and the error should disappear.

Prevention and Maintenance

Key maintenance is the cleaning of the feed (pick-up) rollers. A slightly damp cloth helps restore grip. Do not use paper with excess moisture and adjust tray guides to ensure paper doesn't shift.

When to Call a Technician

If the message continues appearing after cleaning and checking the paper path, a feed clutch or solenoid is likely failing. Call technical support for an internal inspection.

Ficha técnica del equipo

  • Technology: Monochrome Laser
  • Speed: 45 ppm
  • Connectivity: Ethernet
  • Paper Capacity: Up to 4,700 sheets
  • Consumables: Standard and bond paper
  • Recommended Use: Corporate environments
  • Official drivers / firmware

Steps to follow

  1. 1

    Open trays

    Open the paper trays and remove any sheets that are misaligned or wrinkled in the input path.

  2. 2

    Clean sensors

    Check the registration area under the side door, removing small paper pieces that may block sensors.

  3. 3

    Restart

    Close all compartments firmly to reset the jam warning.

Frequently asked questions

You must look for paper debris in the transport zone and clean the registration sensors using compressed air.

Error 077-106 indicates that paper did not reach the registration zone in the specified time, usually due to dirt or worn rollers.

No, but if the problem is recurrent, it means the feed rollers are worn and require technical replacement.

Use appropriate paper weight, keep tray guides adjusted, and periodically clean the rubber rollers with a damp cloth.