077-106VersaLink C8000

Xerox VersaLink C8000 error 077-106: Troubleshooting

The Xerox VersaLink C8000 error 077-106 is a paper registration timeout alert. Asking why is my Xerox VersaLink C8000 showing error 077-106 typically points to sensor delays caused by jams or dust. This high-volume printer is built for reliability.

1 views

Common causes

  • 1Worn feed/registration rollers.
  • 2Improperly set tray guides.
  • 3Obstructed registration sensor.
  • 4Moisture in paper stock.

Solutions

Quick Diagnostics

The 077-106 indicates paper arrived late at the registration gate. Look for wrinkled sheets indicating worn rollers.

Step-by-step Solution

  1. Remove paper: Carefully extract any sheets found in the path.
  2. Align tray: Re-adjust paper guides for proper seating.
  3. Reboot: Cycle power to trigger self-test.

Prevention and Maintenance

Use dry paper and perform roller cleanings every 50,000 impressions.

When to call a technician

If the registration path is clear and errors continue, the sensor module requires checking.

Device Technical Specs

  • Technology: Color laser printer.
  • Speed/Performance: 45 ppm.
  • Connectivity: Ethernet.
  • Paper capacity: 520-sheet tray.
  • Compatible consumable: C8000 toner series.
  • Recommended use: Heavy office documentation.
  • Official drivers / firmware

Steps to follow

  1. 1

    Remove paper

    Open side door and clear any paper near the registration roller.

  2. 2

    Align tray

    Ensure the tray guides are set correctly.

  3. 3

    Reboot

    Close all doors and allow auto-calibration.

Frequently asked questions

Error 077-106 means paper failed to reach the registration sensor within the allotted time.

It is a standard paper jam alert, usually caused by misaligned paper in the tray.

Original Xerox toner series.

Keep the paper stack neat, use compatible paper types, and avoid exceeding tray fill marks.

Xerox VersaLink C8000 error 077-106: Troubleshooting | Vimazdev