077-106VersaLink C7130

Xerox VersaLink C7130 error 077-106: Troubleshooting Guide

The Xerox VersaLink C7130 error 077-106 occurs when the paper fails to reach the registration sensor within the expected timeframe after a print start command. This mechanical communication error is usually triggered by physical obstructions, dirty feed rollers, or improperly loaded paper. Resolving this issue is typically straightforward and restores normal machine functionality.

1 views

Common causes

  • 1Paper moisture causing high friction or sticking.
  • 2Worn feed rollers lacking sufficient traction.
  • 3Loose paper fragments or staples inside the feed path.
  • 4Registration sensors obstructed by paper dust accumulation.

Solutions

Quick Diagnosis

If you notice a brief mechanical noise and this code on the screen, this describes what does 077-106 error mean on Xerox: it is a paper feed issue. Check the paper alignment against the tray guides to ensure the paper is feeding squarely into the unit.

Step-by-step Solution

  1. Pull out the paper tray fully.
  2. Check the transport path for any crinkled paper or debris.
  3. Wipe the feed rollers using a clean, damp cloth (water only).
  4. Fan the paper stack to reduce static electricity.
  5. Reinstall the tray and verify it is pushed fully into place.

Prevention and Maintenance

Clean the feed rollers once a month to ensure maximum traction. Keep paper in a climate-controlled room to avoid moisture issues. Always use OEM-certified Xerox paper to minimize mechanical wear.

When to Call a Technician

If the error continues after clearing the path and cleaning the rollers, the registration sensor may be faulty or the motor drive compromised, requiring a certified technician.

Device Technical Specifications

  • Technology: Color Laser Multifunction
  • Speed: Up to 30 ppm
  • Connectivity: Ethernet, Wi-Fi, NFC, USB
  • Feed Capacity: Up to 3,140 sheets
  • Compatible Consumables: VersaLink C7130 Toner series (CMYK)
  • Recommended Usage: High-Volume Corporate
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Remove tray

    Pull the paper tray completely out of the device.

  2. 2

    Inspect interior

    Check the feed area for any crumpled paper or debris.

  3. 3

    Clean rollers

    Clean the feed rollers with a slightly dampened cloth.

  4. 4

    Reinstall tray

    Replace the tray and restart the print job.

Frequently asked questions

Error 077-106 means the paper did not reach the registration sensor in time, usually due to jams or worn-out feed rollers.

Yes, clear the jam immediately to prevent mechanical stress on the registration sensor or the transport assembly.

This model uses the high-capacity Xerox VersaLink C7130 toner series. Using quality paper significantly reduces recurring jams.

Adjust paper guides precisely and clean the feed rollers monthly to prevent paper dust buildup.

Xerox VersaLink C7130 error 077-106: Troubleshooting Guide | Vimazdev