077-106VersaLink C605

Xerox VersaLink C605 error 077-106: Tray Jam

The Xerox VersaLink C605 error 077-106 is a notification that a paper jam has occurred within the main input tray. The feed path sensor has failed to detect paper movement as intended, resulting in a system lock. To resolve this tray error, paper must be extracted and the feed sensors checked for obstruction.

1 views

Common causes

  • 1Poorly loaded paper causing skewed feeding.
  • 2Worn or dusty rubber feed rollers.
  • 3Sensor obstruction caused by torn paper residue.
  • 4Overfilling the tray beyond the maximum height capacity.

Solutions

Diagnóstico rápido

Error 077-106 is indicated by a screen message specifying the tray. If you hear a repeating clicking noise upon startup, the rollers are attempting to pick up paper without success.

Solución paso a paso

  1. Pull out tray: Slide the affected paper tray completely out and remove all paper for inspection.
  2. Check interior: Use a flashlight to inspect the feeding channel for torn paper scraps or accumulated dust.
  3. Reinstall and test: Load new, properly aligned paper, ensuring it stays under the 'MAX' fill line, and firmly reinsert the tray.

Prevención y mantenimiento

Always fan the paper stack before loading to reduce static adhesion. Clean the rubber feed rollers with distilled water once a month if your print volume is high.

Cuándo llamar a un técnico

If removing all paper and cleaning sensors fails to clear the code, the pick-up rollers likely need professional replacement due to hardening.

Ficha técnica del equipo

  • Technology: Multifunction Color Laser
  • Speed/Output: 55 ppm
  • Connectivity: Ethernet 10/100/1000, USB 3.0
  • Feeding capacity: 700-sheet
  • Compatible consumable: Xerox VersaLink C605 Series Cartridges
  • Usage: Corporate environments
  • Official drivers / firmware

Steps to follow

  1. 1

    Pull out tray

    Slide the affected paper tray out and remove all contained paper.

  2. 2

    Check interior

    Inspect the feeding channel to locate any torn paper scraps.

  3. 3

    Reinstall and test

    Load new, properly aligned paper and reinsert the tray firmly.

Frequently asked questions

This indicates a paper jam detected by a specific sensor in the paper input tray or initial feed path.

Ensure paper is correctly aligned and never exceed the maximum height mark indicated in the tray.

No, toner is independent, although pickup rollers might require cleaning due to wear.

If the error persists without visible paper, a sensor might be obscured by paper dust, requiring cleaning or compressed air.

Xerox VersaLink C605 error 077-106: Tray Jam | Vimazdev