077-106VersaLink C605

Xerox VersaLink C605 error 077-106: Jam Fix

The Xerox VersaLink C605 error 077-106 specifically refers to a paper jam in the output path. It appears when output sensors detect stuck paper or when the media fails to reach the final tray in time. It is a frequent occurrence when using recycled or poor-quality paper.

1 views

Common causes

  • 1Excessively damp paper causing it to fold in the output path.
  • 2Optical exit sensors blocked by paper dust accumulation.
  • 3Use of paper outside specified weight or size guidelines.
  • 4Worn-out exit rollers failing to pull the sheet.

Solutions

Diagnóstico rápido

If the device shows 077-106 and stops, open the rear output tray. If a page edge is visible, remove it gently.

Solución paso a paso

  1. Open output: Open the top or rear output tray based on the specific configuration.
  2. Extract paper: Remove crumpled sheets gently to prevent leaving debris.
  3. Close trays: Verify the door is secure; an loose door triggers false errors.
  4. Quick clean: Use compressed air to clean paper dust from exit sensors.

Prevención y mantenimiento

Use correct paper weights and keep them in a dry place. Humidity is the leading cause of jams, as it softens the paper.

Cuándo llamar a un técnico

If the code persists after cleaning, the internal output sensor is likely blocked or faulty, requiring professional attention.

Ficha técnica del equipo

  • Technology: Color laser printer
  • Output capacity: 500 sheets
  • Paper handling: Adjustable universal tray
  • Compatible Consumables: Standard/High cap toner
  • Recommended Use: General office docs
  • Official drivers / firmware

Steps to follow

  1. 1

    Open output

    Open the rear output tray to inspect the area.

  2. 2

    Extract paper

    Remove the jammed paper gently in the direction of exit.

  3. 3

    Close trays

    Ensure all covers are properly locked.

Frequently asked questions

This error occurs when a sensor in the output path detects an obstruction or paper hasn't exited within the expected time.

It is not dangerous, but must be fixed to avoid internal roller damage.

No, but damp paper increases jam frequency.

Keep paper in a dry place and use standard weight.