077-106PrimeLink C9070

Xerox PrimeLink C9070 077-106 Error: Fuser Jam

The Xerox PrimeLink C9070 error 077-106 occurs when a paper jam is detected at the fuser unit. This component seals toner to paper using high heat and pressure. If the exit sensor does not detect the paper path, the system locks to protect the rollers from damage.

1 views

Common causes

  • 1Media weight not matching panel settings.
  • 2Worn fuser rollers.
  • 3Use of low-quality adhesive labels.
  • 4Adhesive residue buildup.

Solutions

Diagnóstico rápido

The 077-106 usually occurs when heavy stocks are used without adjusting the paper type setting in the printer panel, causing poor heat transfer and sticking.

Solución paso a paso

  1. Cool down: Wait for the fuser to cool.
  2. Open side door: Access the right panel.
  3. Remove paper: Gently extract the jammed sheet.
  4. Close and restart: Secure the unit and reset.

Prevención y mantenimiento

Match the paper weight settings to the physical stock. Ensure labels are laser-rated to prevent adhesive buildup on rollers.

Cuándo llamar a un técnico

If the fuser rollers show physical damage or deep scratches, schedule a replacement service immediately.

Ficha técnica del equipo

  • Technology: Color production laser printer.
  • Speed: 70 ppm.
  • Capacity: High monthly volume.
  • Consumibles: PrimeLink C9070 toner / Fuser unit.
  • Recommended use: Graphic Arts.
  • Official drivers / firmware

Steps to follow

  1. 1

    Cool down

    Power off and wait 15 minutes for the fuser area to cool.

  2. 2

    Open side door

    Open the right side panel to access the fuser unit.

  3. 3

    Remove paper

    Gently remove any paper residue without using metal tools.

  4. 4

    Close and restart

    Ensure the doors are clicked shut and restart the print job.

Frequently asked questions

It indicates a paper jam in the fuser area. The exit sensor failed to detect the sheet properly passing through the heat rollers.

The fuser area gets extremely hot. Always allow the unit to cool down before attempting any physical inspection.

This error directly impacts the fuser unit. Always use paper stocks compatible with your printer settings.

No user-cleaning is expected, but annual professional preventative maintenance helps prevent frequent jams.

Xerox PrimeLink C9070 077-106 Error: Fuser Jam | Vimazdev