077-106Xerox Phaser 6510

Fix Error 077-106 on Xerox Phaser 6510 - Repair Guide

The 077-106 error on the Xerox Phaser 6510 occurs when the printer fails to detect the paper tray or its contents correctly. This disruption often stems from sensor debris or incorrect size settings. Resolving this quickly ensures your printer returns to normal operation.

1 views

Common causes

  • 1Improper paper alignment or guide positioning.
  • 2Debris or dust obstructing the paper sensors.
  • 3Physical misalignment within the feed mechanism.

Solutions

Tray Inspection

  1. Completely remove the paper tray.
  2. Inspect the internal cavity for small scraps of paper.
  3. Reinstall the tray, ensuring it clicks firmly into place.

Sensor Calibration

  1. Gently clean the tray sensors using a lint-free cloth.
  2. Verify the guides match the paper size loaded.
  3. Power cycle the printer to allow for sensor recalibration.

Steps to follow

  1. 1

    Power cycle

    Turn off the printer and unplug the power cord for one minute.

  2. 2

    Tray check

    Remove the paper tray and check for any obstructions.

  3. 3

    Sensor maintenance

    Wipe the area clean and restart the printer.

Frequently asked questions

It is a tray detection error, meaning the printer cannot confirm the status of the paper tray.

Often it is debris-related, but if the sensor is permanently damaged, professional repair may be needed.

Regularly clean the tray area and ensure paper guides are snug against the paper stack.