077-106Iridesse Production Press

Xerox Iridesse Production Press Error 077-106 Fix

The Xerox Iridesse Production Press error 077-106 identifies a stall or obstruction in the final paper output path. Whether it's a real jam or a ghost reading, resolving the Xerox Iridesse Production Press error 077-106 is a straightforward process involving basic clearing of the output path.

0 views

Common causes

  • 1Physical paper jam in the output path.
  • 2Accumulation of toner dust on output sensors.
  • 3Mismatched paper settings for the tray.
  • 4Worn-out exit rollers in the output unit.

Solutions

Diagnóstico rápido

If the machine stops and flashes 077-106, it is almost certainly a sensor issue in the output area. People often ask why does my Xerox Iridesse Production Press show error 077-106 when the tray is empty; the answer is sensor dust accumulation.

Solución paso a paso

  1. Identify the spot: Locate the output tray area.
  2. Clear the path: Remove jammed sheets.
  3. Sensor care: Dust off the optical sensors.
  4. Reset: Close all panels to clear the code.

Prevención y mantenimiento

Clean output sensors regularly to prevent 'ghost' jam signals. Use only high-quality Xerox paper to ensure smooth delivery through the finish line of the press.

Cuándo llamar a un técnico

If the error persists after thorough cleaning and removing any obstructions, contact service to check the mechanical output transport motor.

Ficha técnica del equipo

  • Technology: High-volume output delivery.
  • Maintenance: Sensor cleaning monthly.
  • Consumables: Original Xerox production media.
  • Performance: Optimized for large production runs.
  • Drivers / official firmware

Steps to follow

  1. 1

    Locate output zone

    Open the machine doors to locate the output area indicated by the error message.

  2. 2

    Remove paper

    Carefully remove any stuck sheets, ensuring no remnants remain in the output rollers.

  3. 3

    Clean sensors

    Wipe output sensors clean from dust using a dry cloth.

Frequently asked questions

This code identifies a paper path obstruction or stall in the output section of the press.

It occurs primarily when using high-grammage stock or if sensor accumulation occurs.

Yes, using paper outside the certified grammage range for the output tray will cause frequent stalls.

Keep the sensors free of toner dust and ensure proper paper path configuration in your job settings.

Xerox Iridesse Production Press Error 077-106 Fix | Vimazdev