077-106D110

Xerox D110 Error 077-106: Paper Jam Troubleshooting

The Xerox D110 error 077-106 signifies a disruption within the document transport path. Often, a simple misalignment of the media can trigger this protective message. Knowing why your Xerox D110 error 077-106 happens is the first step toward clearing the path and ensuring your print job continues without further interruption.

0 views

Common causes

  • 1Misaligned Paper: Guides not set properly for paper size.
  • 2Sensor Dust: Debris blocking the path detection.
  • 3Worn Feed Rollers: Inability to grip the paper properly.
  • 4Environmental Factors: Excessive humidity causing paper to cling.

Solutions

Diagnóstico rápido

The 077-106 appears when a sheet fails to reach the designated sensor in the expected duration. Always inspect the transport path for torn pieces of paper that might trigger the alarm.

Solución paso a paso

  1. Open Panels: Access the paper transport doors as directed by the machine's UI.
  2. Remove Paper: Carefully extract any jammed paper in the direction of the travel path.
  3. Clear Sensors: Use a soft cloth to remove dust from the optical path detectors.
  4. Close Up: Secure all doors; the machine will reset automatically.

Prevención y mantenimiento

Fan the paper before loading and verify the edge guides are flush with the stack. Humidity management in your server room will significantly reduce paper feed issues.

Cuándo llamar a un técnico

If the 077-106 status persists despite the path being clear, a transport sensor is likely faulty and needs professional replacement.

Ficha técnica del equipo

  • Technology: Monochrome Production Laser
  • Speed: Up to 110 ppm
  • Connectivity: Gigabit Ethernet
  • Capacity: High-capacity feeding systems
  • Compatible Toner: Xerox D110 series
  • Usage: Production printing
  • Drivers / Official Firmware

Steps to follow

  1. 1

    Open Panels

    Follow the panel instructions to open the paper transport area.

  2. 2

    Remove Paper

    Gently pull the jammed sheet out following the exit path.

  3. 3

    Clear Sensors

    Ensure no small scraps of paper are blocking the optical sensors.

Frequently asked questions

It means the sensor detected a paper feed timeout or jam.

Only if removing the jam does not clear the error message.

Always use genuine Xerox D110 toner cartridges.

Keep your paper stack dry and correctly aligned in the tray.