077-106Xerox AltaLink B8145

Fixing Xerox AltaLink B8145 Error Code 077-106

Error code 077-106 on the Xerox AltaLink B8145 indicates a paper feeding malfunction due to a detection failure in the input path. This code triggers when the sensor fails to register paper transit within the defined timeframe. Resolving this promptly ensures continued efficient operation of your document workflow.

1 views

Common causes

  • 1Debris or paper scraps obstructing the feed sensor.
  • 2Improperly adjusted tray side guides.
  • 3Worn or dirty pickup rollers preventing smooth feed.

Solutions

Check Paper Tray Alignment

  1. Completely remove the affected paper tray.
  2. Verify there are no torn paper fragments inside the path.
  3. Adjust the side guides to match the paper size perfectly.

Feed Roller Maintenance

  1. Locate the pickup rollers behind the paper tray cavity.
  2. Wipe the rollers using a lint-free cloth dampened with water.
  3. Allow to dry fully before reinserting the tray.

Steps to follow

  1. 1

    Open Tray

    Slide the paper tray all the way out of the machine.

  2. 2

    Inspect Path

    Check for any obstructions or torn paper fragments inside the cavity and remove them carefully.

  3. 3

    Reset

    Firmly close the tray and allow the machine to complete its internal sensor re-initialization.

Frequently asked questions

It is usually triggered by physical obstructions or misaligned paper preventing the sensor from registering the sheet's path.

A reboot isn't always required, but if the error persists after clearing the path, a power cycle can refresh the machine's state.

Use high-quality paper within specified weight limits and perform regular cleaning of the feed rollers.

Fixing Xerox AltaLink B8145 Error Code 077-106 | Vimazdev